F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 18R bottom end vs 18RGU Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
bbaacchhyy Forums Junkie Location: Adelaide Registered: September 2003	Re: 18R bottom end vs 18RGU Wed, 27 July 2005 03:23 I have used an 18R-C block to rebuild an 18R-G, but the dipstick hole is on the other side (easily fixed). The pistons are very different, but not sure on the crank/rods. As you would expect, the timing cover needs to be changed over. Norbs is probably your best bet as is Mr DOHC Cheers Michael B [Report message to a moderator]

	Subject	Poster	Date
	18R bottom end vs 18RGU	bnicho	Wed, 27 July 2005 03:09
	Re: 18R bottom end vs 18RGU	bbaacchhyy	Wed, 27 July 2005 03:23
	Re: 18R bottom end vs 18RGU	jeffro RA28	Wed, 27 July 2005 08:05
	Re: 18R bottom end vs 18RGU	Mr DOHC	Wed, 27 July 2005 09:40
	Re: 18R bottom end vs 18RGU	bnicho	Thu, 28 July 2005 06:23
	Re: 18R bottom end vs 18RGU	barned01	Thu, 28 July 2005 12:31
	Re: 18R bottom end vs 18RGU	bbaacchhyy	Thu, 28 July 2005 22:11
	Re: 18R bottom end vs 18RGU	Steve M	Thu, 28 July 2005 14:55
	Re: 18R bottom end vs 18RGU	barned01	Fri, 29 July 2005 01:18

Previous Topic:	2003 Corolla Conquest engine revs query
Next Topic:	Looking at an 18r-g on the weekend - what to check?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.