Author | Topic |

Location: Melbourne
Registered: May 2002
|
Re: Wiring up fuel pump
|
Thu, 28 July 2005 13:23

|
 |
I have done this... I did it as follows...
I used the entire frontcut loom, so that I had the EFI wiring etc, including headlight looms etc. I used everything from the frontcut, wiper motor, radiator with thermo's, wiper stuff. Everything.
Your rear loom is fine and will plug straight in, however you need to repin the plugs, it is easy to take the wires out of the plugs using a metal skewer or similar... Remembering that the GTZ didn't have rear speaker wiring, so you'll have 2 spare wires...
I also re-pinned, changed plugs, extended wires etc for my Instrument Cluster, Wiper Switch, Hazard Switch, Rear Demister Switch.
The dome light plug went straight in without any repinning...
Specifically for fuel, I took a large section of the rear loom from the vehicle I took the tank out of... I then unloomed the fuel pump plug from that rear loom and plugged it into my existing CS rear plug... It's the fat blue wire that is connected to the big plug in the center as a spade connector, it is situated under the thick black rear demister wire on the CS plug, which lines up with the GZE driver's kick.
All it took was patience, with a test light and a multimeter... I simply put indicators on, then probed the frontcut's rear wires until my test light flashed, same with brake lights, parkers etc.
If I can remember, I will sift through my shed and find my wiring notes for the rear plugs and the interior plugs if you need them...
|
|
|
| Subject | Poster | Date |
 |
Wiring up fuel pump
|
AE92gze | Sat, 23 July 2005 13:20 |
 |
Re: Wiring up fuel pump
|
d-shiznit | Sun, 24 July 2005 04:20 |
 |
Re: Wiring up fuel pump
|
AE92gze | Mon, 25 July 2005 11:06 |
 |
Re: Wiring up fuel pump
|
AE92gze | Thu, 28 July 2005 12:17 |
 |
Re: Wiring up fuel pump
|
inertia | Thu, 28 July 2005 13:23 |
 |
Re: Wiring up fuel pump
|
AE92gze | Fri, 29 July 2005 09:41 |
 |
Re: Wiring up fuel pump
|
inertia | Fri, 29 July 2005 09:50 |
 |
Re: Wiring up fuel pump
|
AE92gze | Wed, 03 August 2005 09:47 |
 |
Re: Wiring up fuel pump
|
inertia | Thu, 04 August 2005 10:16 |
 |
Re: Wiring up fuel pump
|
AE92gze | Sat, 06 August 2005 09:11 |
 |
Re: Wiring up fuel pump
|
inertia | Mon, 08 August 2005 12:07 |