| Author | Topic |
|---|
Location:
Adelaide
Registered:
October 2002
|
|
Re: Converting Ke25 to hyraulic clutch
|
Mon, 01 August 2005 08:03
 
|
 |
| oldcorollas wrote on Tue, 05 July 2005 15:09 |
well..
take the stock setup (if it is anything like the 10's) where the clutch pedal connects to a rod that goes through the pedal assembly pivot (if that makes sense) so that the arm that activates the clutch cable is on the drivers side.. turn that arm around 180degrees, so that instead of pulling, it is now pushing, and then hook up the cluthc masters pushrod to this arm.. basically, same as having the CMC on passenger side of MC, but is now on drivers side...
alternatively, you could extend it even further away from motor.. but then you might want a support bearing to stop the whole pedal assembly from bending..
firewall bracing is definitely the go tho.. even with stock setup they can crack eventually.
after that, you are lookign at remote linkage setups... like in dattos or was that accel?? there are some cars with remote brake master assemblies (not the remote booster.. mech linkage to the master..)
cya, Stewart
|
No room to rotate the clutch master cylinder lever thing 180 deg. If you did it, it would pivot that high up that you'd have to mount the master cylinder in the gutter under the windscreen.
I used 5mm plate for no flex and mounted a KE30 pedal lever thing with a few holes drilled here and there. CMC sits in the normal spot, and there is no interference problems with a 4AGE in KE10
|
|
|
| | Subject | Poster | Date |
|---|
 |
Converting Ke25 to hyraulic clutch
|
Megz | Sat, 02 July 2005 11:49 |
|
Re: Converting Ke25 to hyraulic clutch
|
Megz | Sun, 03 July 2005 11:15 |
|
Re: Converting Ke25 to hyraulic clutch
|
Grega | Sun, 03 July 2005 20:27 |
|
Re: Converting Ke25 to hyraulic clutch
|
Megz | Mon, 04 July 2005 00:32 |
|
Re: Converting Ke25 to hyraulic clutch
|
oldcorollas | Mon, 04 July 2005 01:22 |
|
Re: Converting Ke25 to hyraulic clutch
|
ke382TG | Mon, 04 July 2005 01:40 |
|
Re: Converting Ke25 to hyraulic clutch
|
Megz | Mon, 04 July 2005 02:14 |
|
Re: Converting Ke25 to hyraulic clutch
|
ke382TG | Mon, 04 July 2005 02:38 |
|
Re: Converting Ke25 to hyraulic clutch
|
Megz | Mon, 04 July 2005 06:28 |
|
Re: Converting Ke25 to hyraulic clutch
|
slapper | Tue, 05 July 2005 02:53 |
|
Re: Converting Ke25 to hyraulic clutch
|
oldcorollas | Tue, 05 July 2005 03:27 |
|
Re: Converting Ke25 to hyraulic clutch
|
Megz | Tue, 05 July 2005 05:19 |
|
Re: Converting Ke25 to hyraulic clutch
|
oldcorollas | Tue, 05 July 2005 05:39 |
|
Re: Converting Ke25 to hyraulic clutch
|
Megz | Tue, 05 July 2005 08:03 |
|
Re: Converting Ke25 to hyraulic clutch
|
Megz | Mon, 01 August 2005 07:29 |
|
Re: Converting Ke25 to hyraulic clutch
|
ke1500 | Mon, 01 August 2005 08:03 |
|
Re: Converting Ke25 to hyraulic clutch
|
Megz | Mon, 01 August 2005 12:23 |
