| Author | Topic |
|---|
Registered:
May 2005
|
|
Re: 18rg rebuild
|
Tue, 02 August 2005 09:09
 
|
 |
im doing mine right now.
so far.
new rings, honed the block, reco head, all new timing gears and chains, water pump, gasket set, seals.
so far im at about $700-$1000.
note i havent done bearings or chain guides as i dont ahve the money atm.
all my timing stuff cost $220 this conist of
5 x gears ( 2 cam, 1 crank, 2 on the axe shaft
1 x upper chain
1 x lower chain
ive rebuilt all mine myself at work. id say give yourself $2000-4000 for a rebuild by someone else
[Updated on: Tue, 02 August 2005 09:10]
|
|
|
| | Subject | Poster | Date |
|---|
 |
18rg rebuild
|
y42005 | Tue, 02 August 2005 04:37 |
|
Re: 18rg rebuild
|
ra40coupe | Tue, 02 August 2005 09:09 |
|
Re: 18rg rebuild
|
Mr DOHC | Tue, 02 August 2005 09:57 |
|
Re: 18rg rebuild
|
brett_celicacoupe | Tue, 02 August 2005 09:56 |
|
Re: 18rg rebuild
|
ra40coupe | Tue, 02 August 2005 09:59 |
|
Re: 18rg rebuild
|
Mr DOHC | Tue, 02 August 2005 10:01 |
|
Re: 18rg rebuild
|
customSA63 | Tue, 02 August 2005 10:06 |
|
Re: 18rg rebuild
|
ra40coupe | Tue, 02 August 2005 09:58 |
|
Re: 18rg rebuild
|
Steve M | Tue, 02 August 2005 12:56 |
|
Re: 18rg rebuild
|
Norbie | Tue, 02 August 2005 23:33 |
|
Re: 18rg rebuild
|
Mr DOHC | Wed, 03 August 2005 09:25 |
|
Re: 18rg rebuild
|
Steve M | Wed, 03 August 2005 01:27 |
|
Re: 18rg rebuild
|
Norbie | Wed, 03 August 2005 02:44 |
|
Re: 18rg rebuild
|
Lachie | Wed, 03 August 2005 05:55 |
|
Re: 18rg rebuild
|
Norbie | Wed, 03 August 2005 23:03 |
|
Re: 18rg rebuild
|
Steve M | Thu, 04 August 2005 08:00 |
|
Re: 18rg rebuild
|
customSA63 | Thu, 04 August 2005 10:59 |
|
Re: 18rg rebuild
|
Lachie | Fri, 05 August 2005 06:59 |
