| Author | Topic |
|---|
Location:
Brisbane
Registered:
October 2002
|
|
Re: 18rg rebuild
|
Tue, 02 August 2005 09:57
 
|
 |
i am also doign mine at work
bore/hone/deck block
rings/bearings/full gasket set/timing chains/
head at porters getting full port job/guides done {difficult since they are SBC S/S} and seats cut
so far i'm at $650  {and that including the upcoming cost of the port job} 
|
|
|
| | Subject | Poster | Date |
|---|
 |
18rg rebuild
|
y42005 | Tue, 02 August 2005 04:37 |
|
Re: 18rg rebuild
|
ra40coupe | Tue, 02 August 2005 09:09 |
|
Re: 18rg rebuild
|
Mr DOHC | Tue, 02 August 2005 09:57 |
|
Re: 18rg rebuild
|
brett_celicacoupe | Tue, 02 August 2005 09:56 |
|
Re: 18rg rebuild
|
ra40coupe | Tue, 02 August 2005 09:59 |
|
Re: 18rg rebuild
|
Mr DOHC | Tue, 02 August 2005 10:01 |
|
Re: 18rg rebuild
|
customSA63 | Tue, 02 August 2005 10:06 |
|
Re: 18rg rebuild
|
ra40coupe | Tue, 02 August 2005 09:58 |
|
Re: 18rg rebuild
|
Steve M | Tue, 02 August 2005 12:56 |
|
Re: 18rg rebuild
|
Norbie | Tue, 02 August 2005 23:33 |
|
Re: 18rg rebuild
|
Mr DOHC | Wed, 03 August 2005 09:25 |
|
Re: 18rg rebuild
|
Steve M | Wed, 03 August 2005 01:27 |
|
Re: 18rg rebuild
|
Norbie | Wed, 03 August 2005 02:44 |
|
Re: 18rg rebuild
|
Lachie | Wed, 03 August 2005 05:55 |
|
Re: 18rg rebuild
|
Norbie | Wed, 03 August 2005 23:03 |
|
Re: 18rg rebuild
|
Steve M | Thu, 04 August 2005 08:00 |
|
Re: 18rg rebuild
|
customSA63 | Thu, 04 August 2005 10:59 |
|
Re: 18rg rebuild
|
Lachie | Fri, 05 August 2005 06:59 |
