F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » smallport head onto 20v block Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
dori-kin Newcomer Registered: September 2004	Re: smallport head onto 20v block Wed, 03 August 2005 01:45 Hi cri_ag My current setup is a smallport head with blacktop bottom end and Wiseco pistons. I had to block the oil drain in the head. I'd recommend using a silvertop bottom end as the tensioner, oil pump and covers line up correctly. The blacktop bottom end has a silicon tensioner which means you'll have problems fitting the front covers. Also if this is a RWD configuration, be careful when bolting on the gearbox support brackets. I broke a piece off mine because the bolt holes weren't the correct height. Doh! Hope this helps! [Report message to a moderator]

	Subject	Poster	Date
	smallport head onto 20v block	cri_ag	Tue, 02 August 2005 10:24
	Re: smallport head onto 20v block	dori-kin	Wed, 03 August 2005 01:45
	Re: smallport head onto 20v block	kingmick	Wed, 03 August 2005 10:48
	Re: smallport head onto 20v block	cri_ag	Thu, 04 August 2005 11:37
	Re: smallport head onto 20v block	kingmick	Thu, 04 August 2005 21:16
	Re: smallport head onto 20v block	Jezza	Thu, 04 August 2005 21:54
	Re: smallport head onto 20v block	dori-kin	Fri, 05 August 2005 04:20
	Re: smallport head onto 20v block	kingmick	Sat, 06 August 2005 10:20
	Re: smallport head onto 20v block	cri_ag	Sat, 06 August 2005 10:23
	Re: smallport head onto 20v block	cri_ag	Sat, 06 August 2005 10:20

Previous Topic:	5M-GEy injectors
Next Topic:	V6 Spark Plugs

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.