F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Noisy tappet Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
dingaling Forums Junkie Location: tas Registered: June 2002	Re: Noisy tappet Wed, 03 August 2005 11:55 Yeah you will need feeler guages. You need to measure the clearance between the shim (looks like a coin) and the bottom of the cam lobe. (not the point end) Then with your results you can see which ones are out of spec (ie too much clearance, should be within .30mm on exuast, and within .25mm on intake side. Once you work out the out of spec clearances, you need to measure the thickness of those shims and from that you can work out the correct sized shim to replace it with and fix the clearance. Sounds pretty complicated but it isn't too hard. [Report message to a moderator]

	Subject	Poster	Date
	Noisy tappet	EMD-AE86	Wed, 03 August 2005 10:14
	Re: Noisy tappet	Jack05	Wed, 03 August 2005 11:32
	Re: Noisy tappet	V8_MA61	Wed, 03 August 2005 11:34
	Re: Noisy tappet	dingaling	Wed, 03 August 2005 11:55
	Re: Noisy tappet	dingaling	Wed, 03 August 2005 23:50
	Re: Noisy tappet	V8_MA61	Wed, 03 August 2005 11:56
	Re: Noisy tappet	Norbie	Thu, 04 August 2005 00:18
	Re: Noisy tappet	V8_MA61	Thu, 04 August 2005 06:27
	Re: Noisy tappet	Jack05	Thu, 04 August 2005 09:19
	Re: Noisy tappet	EMD-AE86	Sat, 06 August 2005 10:23
	Re: Noisy tappet	Jack05	Sun, 07 August 2005 02:54

Previous Topic:	cable for battery relocation
Next Topic:	Highly technical! cam cover color !

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.