F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » ST205 gearbox clutch adjustment Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
dynomatt Regular Location: Brisbane Registered: May 2004	Re: ST205 gearbox clutch adjustment Wed, 03 August 2005 23:30 when the clutch is disengaged, can you wiggle the clutch fork by hand? If you can, then there's no pressure on the clutch from the fork, and consequently, the hydraulic system is fine. If you can't, then you need to have adjust it at the master cylinder. The rod referred to is a rod connecting the clutch pedal into the clutch master cylinder. It has a nut and a threaded bracket which by loosening the nut, and spinning the shaft (keeping the bracket attached to the pedal) you can adjust the system. hope this helps. Matt [Report message to a moderator]

	Subject	Poster	Date
	ST205 gearbox clutch adjustment	zasa	Wed, 03 August 2005 22:24
	Re: ST205 gearbox clutch adjustment	SW20R	Wed, 03 August 2005 22:40
	Re: ST205 gearbox clutch adjustment	zasa	Wed, 03 August 2005 22:49
	Re: ST205 gearbox clutch adjustment	dynomatt	Wed, 03 August 2005 23:30
	Re: ST205 gearbox clutch adjustment	zasa	Thu, 04 August 2005 06:25
	Re: ST205 gearbox clutch adjustment	oldcorollas	Thu, 04 August 2005 21:04
	Re: ST205 gearbox clutch adjustment	dynomatt	Thu, 04 August 2005 22:28
	Re: ST205 gearbox clutch adjustment	zasa	Thu, 04 August 2005 21:00
	Re: ST205 gearbox clutch adjustment	zasa	Thu, 04 August 2005 22:13
	Re: ST205 gearbox clutch adjustment	zasa	Sat, 06 August 2005 02:49
	Re: ST205 gearbox clutch adjustment	Gazzman	Sat, 06 August 2005 03:52
	Re: ST205 gearbox clutch adjustment	zasa	Sat, 06 August 2005 04:53

Previous Topic:	Disc Brake shims
Next Topic:	1984 Cressida Glxi Parts into a 1984 celica ra65

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.