F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Help on conversion from auto to manual Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
CrUZsida Forums Junkie I supported Toymods Location: Australia Registered: November 2003	Re: Help on conversion from auto to manual Thu, 04 August 2005 07:26 If you get a custom one made up, you measure from the centre line where the centre bearing bolts up, to the seal in the back of the gearbox. At least that is where I've been told to measure it each time I'd had the shaft modded. And auto to manual is usually an increase of 70-80mm. [Report message to a moderator]

	Subject	Poster	Date
	Help on conversion from auto to manual	overboostin007	Wed, 03 August 2005 06:58
	Re: Help on conversion from auto to manual	Rob.C	Wed, 03 August 2005 07:06
	Re: Help on conversion from auto to manual	overboostin007	Thu, 04 August 2005 06:37
	Re: Help on conversion from auto to manual	CrUZsida	Thu, 04 August 2005 07:26

Previous Topic:	1989 cresta info needed
Next Topic:	4agze head on 20v bottom end??

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.