F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Wiring up fuel pump Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
inertia Forums Junkie Location: Melbourne Registered: May 2002	Re: Wiring up fuel pump Thu, 04 August 2005 10:16 Well the colours DID line up mostly. What I did was this... My frontcut had a bit of the rear loom that had been cut with the chassis... I undid the tape and put a nice piece of masking tape on each wire so I could label them. Then I turned the car's ignition to the ON position and proceeded to check BRAKE LIGHTS, INDICATORS, REAR DEMISTOR, REAR WIPER, PARKER LIGHTS with a test light and multimeter Doing this I worked out what each wire did and was able to then check its position in each plug. I wrote this all down in a nice diagram of the plugs. I then got mum to sit behind the car. I then proceeded to check the above functions again and tapped the frontcut loom wire for say BRAKE LIGHTS onto the pin in my old carby loom's plug, which had the same colour etc. Doing this we were able to workout almost everything. I have my diagrams somewhere and can post them if u want. [Report message to a moderator]

	Subject	Poster	Date
	Wiring up fuel pump	AE92gze	Sat, 23 July 2005 13:20
	Re: Wiring up fuel pump	d-shiznit	Sun, 24 July 2005 04:20
	Re: Wiring up fuel pump	AE92gze	Mon, 25 July 2005 11:06
	Re: Wiring up fuel pump	AE92gze	Thu, 28 July 2005 12:17
	Re: Wiring up fuel pump	inertia	Thu, 28 July 2005 13:23
	Re: Wiring up fuel pump	AE92gze	Fri, 29 July 2005 09:41
	Re: Wiring up fuel pump	inertia	Fri, 29 July 2005 09:50
	Re: Wiring up fuel pump	AE92gze	Wed, 03 August 2005 09:47
	Re: Wiring up fuel pump	inertia	Thu, 04 August 2005 10:16
	Re: Wiring up fuel pump	AE92gze	Sat, 06 August 2005 09:11
	Re: Wiring up fuel pump	inertia	Mon, 08 August 2005 12:07

Previous Topic:	JZX81 Chaser / Mk II / Cresta Differences
Next Topic:	Guide: How to convert water outlets to RWD on 100kw 4A-GE

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.