F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1jz-gte Octane requirements. Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Guest	Re: 1jz-gte Octane requirements. Tue, 28 January 2003 03:22 I am sure my KNock sensors are active in WOT, whether that is because of my fconv or not I dont know. When unsatisfactory fuel or high intake temps cuase detonation (not yet audible) the ignition is retarded. That is what happened at the dyno day for me. I had discovered the ignition retard thing in the summer heat before christmas, and ever since have not run it at over 12 psi during the day since. But on the dyno day I tried for a run at 16 psi and the ign retarded so far it nearly stopped as it climbed on boost. stoopid me didnt turn the boost down and so got crap figures !!! On a cold night I can run with Andy (212 rwkw) with very little difference. DAMN !! I gotta get rid of this stock intercooler ! Matt [Report message to a moderator]

	Subject	Poster	Date
	1jz-gte Octane requirements.	Ollygt	Sat, 25 January 2003 11:47
	Re: 1jz-gte Octane requirements.	Remedy	Sat, 25 January 2003 15:17
	Re: 1jz-gte Octane requirements.	Ollygt	Sun, 26 January 2003 00:53
	Re: 1jz-gte Octane requirements.	Soarer	Sun, 26 January 2003 00:59
	Re: 1jz-gte Octane requirements.	humble	Sun, 26 January 2003 23:17
	Re: 1jz-gte Octane requirements.	Nark	Tue, 28 January 2003 01:06
	Re: 1jz-gte Octane requirements.	Remedy	Tue, 28 January 2003 01:24
	Re: 1jz-gte Octane requirements.		Tue, 28 January 2003 03:22
	Re: 1jz-gte Octane requirements.	Bugman	Tue, 28 January 2003 03:28
	Re: 1jz-gte Octane requirements.		Tue, 28 January 2003 03:43
	Re: 1jz-gte Octane requirements.	Helmann	Tue, 28 January 2003 05:36
	Re: 1jz-gte Octane requirements.	Nark	Tue, 28 January 2003 05:43
	Re: 1jz-gte Octane requirements.	Ollygt	Tue, 28 January 2003 06:15
	Re: 1jz-gte Octane requirements.	Nark	Tue, 28 January 2003 06:24
	Re: 1jz-gte Octane requirements.	Norbie	Tue, 28 January 2003 06:23
	Re: 1jz-gte Octane requirements.	Ollygt	Tue, 28 January 2003 06:30
	Re: 1jz-gte Octane requirements.	SUPRAGTE	Tue, 28 January 2003 10:28

Previous Topic:	Bonnet Scope (for cold air intake)
Next Topic:	Compression readings in an 18R-C

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.