Toymods Car Club Inc: Tech & Conversions => 1jz-gte Octane requirements.

Toymods Car Club
www.toymods.org.au

F.A.Q.

Toymods » Tech & Conversions » 1jz-gte Octane requirements. Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Guest

Re: 1jz-gte Octane requirements.	Tue, 28 January 2003 03:43

I think the gist here is that even if you think your import motor (especially factory computers) is running happily on 92 or 95 RON fuel, IT WILL ALWAYS RUN BETTER ON GOOD 98 RON FUEL !!! Even 98 RON fuel will not always completely fix this knock sensor intervention on a hot day with stock 'cooler and 1 barr boost. most commercial octane boosters will not stop this either. I have a cheap and accessable alternative that works, but if I told you what it was you'd laugh. So I wont. Try sniffing my fumes one day yuou should be able to guess !! Perhapps Celicamad can shed some light here, he has been researching this topic and I beleive has found a solution. Matt [Report message to a moderator]

[Message index]

Subject Poster Date

Read Message 1jz-gte Octane requirements. Ollygt Sat, 25 January 2003 11:47
Re: 1jz-gte Octane requirements. Remedy Sat, 25 January 2003 15:17
Re: 1jz-gte Octane requirements. Ollygt Sun, 26 January 2003 00:53
Re: 1jz-gte Octane requirements. Soarer Sun, 26 January 2003 00:59
Read Message Re: 1jz-gte Octane requirements. humble Sun, 26 January 2003 23:17
Re: 1jz-gte Octane requirements. Nark Tue, 28 January 2003 01:06
Re: 1jz-gte Octane requirements. Remedy Tue, 28 January 2003 01:24
Re: 1jz-gte Octane requirements. Tue, 28 January 2003 03:22
Read Message Re: 1jz-gte Octane requirements. Bugman Tue, 28 January 2003 03:28
Re: 1jz-gte Octane requirements. Tue, 28 January 2003 03:43
Re: 1jz-gte Octane requirements. Helmann Tue, 28 January 2003 05:36
Re: 1jz-gte Octane requirements. Nark Tue, 28 January 2003 05:43
Read Message Re: 1jz-gte Octane requirements. Ollygt Tue, 28 January 2003 06:15
Re: 1jz-gte Octane requirements. Nark Tue, 28 January 2003 06:24
Re: 1jz-gte Octane requirements. Norbie Tue, 28 January 2003 06:23
Re: 1jz-gte Octane requirements. Ollygt Tue, 28 January 2003 06:30
Read Message Re: 1jz-gte Octane requirements. SUPRAGTE Tue, 28 January 2003 10:28

Previous Topic: Bonnet Scope (for cold air intake)
Next Topic: Compression readings in an 18R-C

-=] Back to Top [=-

Current Time: Tue Mar 11 18:00:22 UTC 2025

Total time taken to generate the page: 0.0063199996948242 seconds

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.