F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » wiring 3d to 4agze Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
sebta22 Regular Location: Perth Registered: August 2002	Re: wiring 3d to 4agze Mon, 08 August 2005 09:01 I have finished wiring up wolf 3d v4 to 4agte with out any major issues. I didnt have 4agze std ignitor so I emailed wolf themselves and they told me to use std bosche ignitor which is simple. I think if you download latest installation manual it calls up a bosche 021/024 coil ignitor. You need two ignitors (unless you buy expensive single dual coil ignitor)and wire it up as per 4 cylinder wastespark arrangement section 4.3.4.2. When you try (and i mean try) and start the engine you will come across a problem with the CAS trigger. The signal from toyota standard CAS is too weak and causes the sparks and fuel injectors to fire all over the place. You need to order a little black box (approx $70)from wolf (item no. 310-070-400)which plugs directly between ECU and CAS, and eliminates any problems. [Report message to a moderator]

	Subject	Poster	Date
	wiring 3d to 4agze	rodney	Mon, 08 August 2005 06:41
	Re: wiring 3d to 4agze	4agte	Mon, 08 August 2005 07:28
	Re: wiring 3d to 4agze	sideshow	Mon, 08 August 2005 08:04
	Re: wiring 3d to 4agze	sebta22	Mon, 08 August 2005 09:01
	Re: wiring 3d to 4agze	rx793	Thu, 11 August 2005 14:49
	Re: wiring 3d to 4agze	4agte	Thu, 11 August 2005 22:10
	Re: wiring 3d to 4agze	Henn	Mon, 08 August 2005 13:23
	Re: wiring 3d to 4agze	Henn	Fri, 12 August 2005 00:44
	Re: wiring 3d to 4agze	4agte	Fri, 12 August 2005 00:54
	Re: wiring 3d to 4agze	sebta22	Fri, 12 August 2005 07:48
	Re: wiring 3d to 4agze	rodney	Sat, 13 August 2005 06:24

Previous Topic:	3k extractors
Next Topic:	home made head studs?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.