F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » wiring 3d to 4agze Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Henn Forums Junkie Location: Rosanna, Melb Registered: June 2002	Re: wiring 3d to 4agze Mon, 08 August 2005 13:23 With absolutely zero previous wiring experience I wired a 3D V4 to a 4AGZE with no major dramas. Just read the manuals carefully a couple of times. There are good lists of what all the wires in the loom are and basically where they need to go. I have had no problems running the CAS signal direct to the ECU either. However I do use the variable signal level over the rev range function. Use a pair of ignitors. Bosch 008 ones from Camiras will do, along with probably many others. Hen PS, re-reading it sounds like you may not have the manuals. Get in touch with Wolf and see what they can do about that. [Report message to a moderator]

	Subject	Poster	Date
	wiring 3d to 4agze	rodney	Mon, 08 August 2005 06:41
	Re: wiring 3d to 4agze	4agte	Mon, 08 August 2005 07:28
	Re: wiring 3d to 4agze	sideshow	Mon, 08 August 2005 08:04
	Re: wiring 3d to 4agze	sebta22	Mon, 08 August 2005 09:01
	Re: wiring 3d to 4agze	rx793	Thu, 11 August 2005 14:49
	Re: wiring 3d to 4agze	4agte	Thu, 11 August 2005 22:10
	Re: wiring 3d to 4agze	Henn	Mon, 08 August 2005 13:23
	Re: wiring 3d to 4agze	Henn	Fri, 12 August 2005 00:44
	Re: wiring 3d to 4agze	4agte	Fri, 12 August 2005 00:54
	Re: wiring 3d to 4agze	sebta22	Fri, 12 August 2005 07:48
	Re: wiring 3d to 4agze	rodney	Sat, 13 August 2005 06:24

Previous Topic:	3k extractors
Next Topic:	home made head studs?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.