F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » wjich way does clutch go in Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Skip Forums Junkie Location: Perth Registered: October 2003	Re: wjich way does clutch go in Tue, 09 August 2005 01:52 In my case I started the car in neutral, after about 1 minute I clutched in to engage reverse and take off, at this point it made a nasty whining noise (crank grinding thrust washer real bad). I clutched out and put it in neutral again after about 30 seconds the engine stalled and would not sturn over again it had bound up. When I undid my bellhousing bolts the pressure was releaved and the motor turned again but it was short of thrust washers which were now lyng in the sump (didnt know this at the time, took another couple hundred km's of driving and an oil change to find out). But anyway I should have known there was a problem as I had a fair bit of problems getting the engine and bellhousing to mate up properly. [Report message to a moderator]

	Subject	Poster	Date
	wjich way does clutch go in	Mr DOHC	Sat, 06 August 2005 02:57
	Re: wjich way does clutch go in	Rallystanza	Sat, 06 August 2005 03:20
	Re: wjich way does clutch go in	thechuckster	Sat, 06 August 2005 04:25
	Re: wjich way does clutch go in	ra40coupe	Sat, 06 August 2005 04:41
	Re: wjich way does clutch go in	Mr DOHC	Sat, 06 August 2005 05:18
	Re: wjich way does clutch go in	Norbie	Sat, 06 August 2005 14:05
	Re: wjich way does clutch go in	Mr DOHC	Sat, 06 August 2005 23:02
	Re: wjich way does clutch go in	Norbie	Mon, 08 August 2005 00:25
	Re: wjich way does clutch go in	Skip	Mon, 08 August 2005 00:27
	Re: wjich way does clutch go in	Merudo	Mon, 08 August 2005 00:37
	Re: wjich way does clutch go in	wilbo666	Mon, 08 August 2005 00:56
	Re: wjich way does clutch go in	Skip	Mon, 08 August 2005 01:41
	Re: wjich way does clutch go in	Merudo	Mon, 08 August 2005 01:41
	Re: wjich way does clutch go in	ndgcpr	Mon, 08 August 2005 23:17
	Re: wjich way does clutch go in	Norbie	Mon, 08 August 2005 23:42
	Re: wjich way does clutch go in	Skip	Tue, 09 August 2005 01:52
	Re: wjich way does clutch go in	styler	Tue, 09 August 2005 07:15

Previous Topic:	4agze knock sensor help
Next Topic:	cutting/crafting/drilling thin metal

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.