F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Tightening a Crank Bolt? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ChuckLandwehr Forums Junkie Location: Canberra Registered: May 2002	Re: Tightening a Crank Bolt? Tue, 09 August 2005 06:13 For a manual, if it is the car, select 1st gear, pull handbrake on. Starts swinging, if your clutch slips at 250ftlbs it time for a new one. For an auto, whip off the lower inspection plate at the bellhousing, and place a bar between the lightening holes in the flex plate, and the bellhousing, start swinging. cheers Chuck. [Report message to a moderator]

	Subject	Poster	Date
	Tightening a Crank Bolt?	ZZT231	Mon, 08 August 2005 23:57
	Re: Tightening a Crank Bolt?	havabeer	Tue, 09 August 2005 00:22
	Re: Tightening a Crank Bolt?	ZZT231	Tue, 09 August 2005 01:41
	Re: Tightening a Crank Bolt?	rob_RA40	Tue, 09 August 2005 00:46
	Re: Tightening a Crank Bolt?	wilbo666	Tue, 09 August 2005 01:11
	Re: Tightening a Crank Bolt?	CrUZsida	Tue, 09 August 2005 01:27
	Re: Tightening a Crank Bolt?	Viper_III	Tue, 09 August 2005 01:33
	Re: Tightening a Crank Bolt?	Dale_ta22	Tue, 09 August 2005 01:43
	Re: Tightening a Crank Bolt?	ChuckLandwehr	Tue, 09 August 2005 05:02
	Re: Tightening a Crank Bolt?	CrUZsida	Tue, 09 August 2005 05:05
	Re: Tightening a Crank Bolt?	wilbo666	Tue, 09 August 2005 05:43
	Re: Tightening a Crank Bolt?	ChuckLandwehr	Tue, 09 August 2005 06:13
	Re: Tightening a Crank Bolt?	oldcorollas	Tue, 09 August 2005 06:48
	Re: Tightening a Crank Bolt?	ChuckLandwehr	Tue, 09 August 2005 08:07
	Re: Tightening a Crank Bolt?	oldcorollas	Tue, 09 August 2005 09:49

Previous Topic:	1jz problems?
Next Topic:	Quick way to strip paint off car.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.