| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: Tightening a Crank Bolt?
|
Tue, 09 August 2005 09:49
|
 |
we had to do this to a honduh, after my mate tried to crack off the crank pulley bolt using spanner and starter motor.....
honduh motors spin backwards, but the crank pulley bolt is not reversed  bugger....
you may get a little bit of water going into sump, but not enough to be of concern, and it sure as hell stops the motor spinning around.. to remove said water, remove spark plug and turn over the motor by hand..
|
|
|
| | Subject | Poster | Date |
|---|
 |
Tightening a Crank Bolt?
|
ZZT231 | Mon, 08 August 2005 23:57 |
|
Re: Tightening a Crank Bolt?
|
havabeer | Tue, 09 August 2005 00:22 |
|
Re: Tightening a Crank Bolt?
|
ZZT231 | Tue, 09 August 2005 01:41 |
|
Re: Tightening a Crank Bolt?
|
rob_RA40 | Tue, 09 August 2005 00:46 |
|
Re: Tightening a Crank Bolt?
|
wilbo666 | Tue, 09 August 2005 01:11 |
|
Re: Tightening a Crank Bolt?
|
CrUZsida | Tue, 09 August 2005 01:27 |
|
Re: Tightening a Crank Bolt?
|
Viper_III | Tue, 09 August 2005 01:33 |
|
Re: Tightening a Crank Bolt?
|
Dale_ta22 | Tue, 09 August 2005 01:43 |
|
Re: Tightening a Crank Bolt?
|
ChuckLandwehr | Tue, 09 August 2005 05:02 |
|
Re: Tightening a Crank Bolt?
|
CrUZsida | Tue, 09 August 2005 05:05 |
|
Re: Tightening a Crank Bolt?
|
wilbo666 | Tue, 09 August 2005 05:43 |
|
Re: Tightening a Crank Bolt?
|
ChuckLandwehr | Tue, 09 August 2005 06:13 |
|
Re: Tightening a Crank Bolt?
|
oldcorollas | Tue, 09 August 2005 06:48 |
|
Re: Tightening a Crank Bolt?
|
ChuckLandwehr | Tue, 09 August 2005 08:07 |
|
Re: Tightening a Crank Bolt?
|
oldcorollas | Tue, 09 August 2005 09:49 |
