F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1g - ra28 questions Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ra23celica Forums Junkie Registered: November 2002	Re: 1g - ra28 questions Thu, 11 August 2005 11:36 For the 1G-GZE install in to my RA23, I read all about the different brackets, rubber mounts and spacers, but ended up using the 1G-GZE engine brakets from a GS130 Crown (funnily enough!) and brand new 18R engine rubber mounts from Toyota. They were 5mm thicker than the original mounts I had, and I did not need to use any spacer plates, on either side. Here is a top secret tip, if you can afford to buy them, look at Nissan 720 petrol rubber mounts, they are virtually identical to the 18R mount and thicker again.... [Report message to a moderator]

	Subject	Poster	Date
	1g - ra28 questions	benen	Wed, 10 August 2005 12:34
	Re: 1g - ra28 questions	brett_celicacoupe	Wed, 10 August 2005 13:19
	Re: 1g - ra28 questions	Lambolica	Wed, 10 August 2005 23:16
	Re: 1g - ra28 questions	ChuckLandwehr	Thu, 11 August 2005 05:51
	Re: 1g - ra28 questions	ra23celica	Thu, 11 August 2005 11:36
	Re: 1g - ra28 questions	brett_celicacoupe	Thu, 11 August 2005 12:07
	Re: 1g - ra28 questions	benen	Thu, 11 August 2005 12:32
	Re: 1g - ra28 questions	ra23celica	Fri, 12 August 2005 14:02
	Re: 1g - ra28 questions	benen	Sat, 13 August 2005 09:34
	Re: 1g - ra28 questions	ra23celica	Fri, 12 August 2005 14:00
	Re: 1g - ra28 questions	brett_celicacoupe	Thu, 11 August 2005 13:00

Previous Topic:	troubles wiring up 100kw conversion
Next Topic:	3k extractors

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.