| Author | Topic |
|---|
Location:
adelaide
Registered:
April 2003
|
|
Re: troubles wiring up 100kw conversion
|
Fri, 12 August 2005 05:39
 
|
 |
I concur.
Did the 100kw into my ae86. Takes couple of hours.
You dont need to touch any body loom at all. Only the ECU loom. You need a high press fuel pump, and start relay pump-primer thing (sorry forgot its name)...most EFi toyos have one under the pass kick panel.
Connect all the sensors to the motor, then (wire by wire)Tag both ends (at the sensor and the ECU) for easy connection, chop the stock ones and extend them by heaps. Less in your FWD case but still leave them heaps long. Run them all into the car, mount the ecu. then all you do is chop and match the wires to the ones on the ECU plugs. You also need constant and switched power for the ECU...Find these in ur under bonnet fuse box.
Then enjoy your PHAT 4AGE sound....mmmm.
Good luck dude! Let us know how it goes.
Jon
|
|
|
