F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em?? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
wagonist Forums Junkie Toymods Club Treasurer Location: Sydney Registered: May 2002	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em?? Fri, 12 August 2005 09:04 I imagine that this conversion would be fairly similar to do like my ST205 caliper conversion. The ST205 calipers are the same as the Supra ones except the casting for the inner part is different to suit the different mounting position (I know they're the same because I'm running JZA80 pads ) In this case you might be lucky enough that you don't need adaptor brackets. If you can find JZA80 front suspension, measure the following (easiest with the disc & caliper removed) & compare with your current setup: 1. distance between the 2 mounting bolts 2. distance from each of the mounting bolts to the centre of the wheel (or where it would be if still mounted) 3. (this one's a bit tricky to explain) the distance from the centre of the mounting tabs on the steering knuckle outwards to the centre of the brake rotor. The last one is needed to know whether the caliper will line up with the disc. ie one the ST205, the caliper is mounted to the back of the mounting tabs, whereas the original was mounted to the front. On the Subaru I've upgradign to 4 spots, both types of caliper sit on the outside. If all the measurements add up, then you may be lucky enough to only have to do the machining I had to do with no adaptor brackets (very engineer friendly) Good luck with it! [Report message to a moderator]

	Subject	Poster	Date
	Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	RAWS	Thu, 11 August 2005 13:04
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Fri, 12 August 2005 00:55
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	MR 1JZ	Fri, 12 August 2005 05:09
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Fri, 12 August 2005 05:17
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	RAWS	Fri, 12 August 2005 07:51
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Fri, 12 August 2005 07:56
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	wagonist	Fri, 12 August 2005 09:04
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	RAWS	Fri, 12 August 2005 10:39
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	DeViL rOlLa	Fri, 12 August 2005 11:11
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Mon, 15 August 2005 08:04
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	MR 1JZ	Mon, 15 August 2005 08:15
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	Allan	Mon, 15 August 2005 09:29
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	MR 1JZ	Mon, 15 August 2005 14:11
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	Allan	Tue, 16 August 2005 10:26
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	RAWS	Tue, 16 August 2005 11:57
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	Allan	Tue, 16 August 2005 12:58
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Tue, 16 August 2005 13:54
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	Allan	Wed, 17 August 2005 09:03
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Wed, 17 August 2005 09:10
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	kemicalx	Tue, 16 August 2005 12:27
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	BlackSupra	Wed, 17 August 2005 09:05
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	RAWS	Thu, 18 August 2005 08:06
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	Manny	Thu, 18 August 2005 08:58
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	kemicalx	Fri, 19 August 2005 00:32
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Fri, 19 August 2005 00:41
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	kemicalx	Fri, 19 August 2005 00:55
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Fri, 19 August 2005 01:02
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	kemicalx	Fri, 19 August 2005 01:27
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Fri, 19 August 2005 01:38
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	kemicalx	Fri, 19 August 2005 01:47
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Fri, 19 August 2005 01:50
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	RAWS	Fri, 19 August 2005 08:51
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	Manny	Fri, 19 August 2005 10:12
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Fri, 19 August 2005 10:31
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	Ray_GZ20	Fri, 19 August 2005 10:45
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Fri, 19 August 2005 10:48
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	RAWS	Sun, 21 August 2005 05:47
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	Manny	Sun, 21 August 2005 09:20
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	kemicalx	Sun, 21 August 2005 07:26
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	RAWS	Sun, 21 August 2005 11:37
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	Manny	Sun, 21 August 2005 12:18
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	kemicalx	Sun, 21 August 2005 11:57
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Sun, 21 August 2005 12:01
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	RAWS	Sun, 21 August 2005 12:04
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Sun, 21 August 2005 12:32
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	kemicalx	Sun, 21 August 2005 14:46
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	CrUZsida	Mon, 22 August 2005 00:37
	Re: Fitting jza80 4-pots to jza70. NEED BRACKETS, who makes em??	RAWS	Tue, 30 August 2005 22:37

Previous Topic:	Disabling TVIS
Next Topic:	Do 15 inch steelies fit AE92 corolla ?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.