| Author | Topic |
|---|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: speed sensor ae92 to 20v blacktop
|
Sat, 13 August 2005 22:13
 
|
 |
well with a silvertop 20V, you most definitely can use the SPD wire which comes down from the dash to the stock ECU on an AE92 SX....
In fact, on the AE101 cars, the electronic speedo sends its signal to the dash guages and then the SPD signal is generated by the speedo guage and that goes to the ECU.
unsure of how applicable this is with a blecktop
|
|
|
| | Subject | Poster | Date |
|---|
 |
speed sensor ae92 to 20v blacktop
|
bmgtz | Sat, 13 August 2005 12:51 |
|
Re: speed sensor ae92 to 20v blacktop
|
THE WITZL | Sat, 13 August 2005 22:13 |
|
Re: speed sensor ae92 to 20v blacktop
|
jasonp1977 | Sun, 14 August 2005 04:29 |
|
Re: speed sensor ae92 to 20v blacktop
|
bmgtz | Sun, 14 August 2005 08:43 |
|
Re: speed sensor ae92 to 20v blacktop
|
Johnny | Sun, 14 August 2005 10:55 |
|
Re: speed sensor ae92 to 20v blacktop
|
Sam_Q | Mon, 15 August 2005 06:01 |
|
Re: speed sensor ae92 to 20v blacktop
|
bmgtz | Tue, 16 August 2005 02:39 |
|
Re: speed sensor ae92 to 20v blacktop
|
Johnny | Tue, 16 August 2005 11:50 |
|
Re: speed sensor ae92 to 20v blacktop
|
sideshow | Tue, 16 August 2005 12:18 |
|
Re: speed sensor ae92 to 20v blacktop
|
Sam_Q | Tue, 16 August 2005 14:27 |
|
Re: speed sensor ae92 to 20v blacktop
|
Johnny | Tue, 16 August 2005 15:53 |
|
Re: speed sensor ae92 to 20v blacktop
|
Sam_Q | Tue, 16 August 2005 20:52 |
|
Re: speed sensor ae92 to 20v blacktop
|
sideshow | Tue, 16 August 2005 22:40 |
|
Re: speed sensor ae92 to 20v blacktop
|
Johnny | Wed, 17 August 2005 00:12 |
