| Author | Topic |
|---|
Location:
Sydney
Registered:
September 2004
|
|
Re: 4AGTE SETUP
|
Sun, 14 August 2005 00:56
 
|
 |
| 4ageeza wrote on Sun, 14 August 2005 10:29 |
noOb question (most likely)...is it possible to remove the on the TVIS intake to completely remove the TVIS plate, and simply bolt the manifold straight to the head? Or is some sort of spacer required?
|
There are many arguments to this. Some people have simply bolted the mani straight onto the head. If you do this, you will need both gaskets, tvis and manifold gasket, stuck together to form a decent seal.
Another option is to retain the tvis plate in working order so they'll still open at 4k rpm.
OR you can use the plate but with the butterflies/shaft taken out and the holes welded up. I have gone for this method as i have largish cams (272 deg) i've heard from people with VERY modded 4agtes, that you'll get manifold leaks without the spacer.
Eddie.
|
|
|
| | Subject | Poster | Date |
|---|
 |
4AGTE SETUP
|
the_sleepa | Sat, 13 August 2005 09:25 |
|
Re: 4AGTE SETUP
|
DRFT - 86 | Sat, 13 August 2005 13:02 |
|
Re: 4AGTE SETUP
|
mrshin | Sat, 13 August 2005 13:19 |
|
Re: 4AGTE SETUP
|
DRFT - 86 | Sun, 14 August 2005 00:06 |
|
Re: 4AGTE SETUP
|
Yian | Sun, 14 August 2005 00:10 |
|
Re: 4AGTE SETUP
|
4ageeza | Sun, 14 August 2005 00:29 |
|
Re: 4AGTE SETUP
|
Big T | Sun, 14 August 2005 00:56 |
|
Re: 4AGTE SETUP
|
4ageeza | Sun, 14 August 2005 01:10 |
|
Re: 4AGTE SETUP
|
feral4mr2 | Sun, 14 August 2005 03:36 |
|
Re: 4AGTE SETUP
|
fatmr2 | Sun, 14 August 2005 04:01 |
|
Re: 4AGTE SETUP
|
TE72_Turbo | Sun, 14 August 2005 11:02 |
|
Re: 4AGTE SETUP
|
4agte | Sun, 14 August 2005 21:33 |
