Toymods Car Club Inc: Tech & Conversions => speed sensor ae92 to 20v blacktop

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » speed sensor ae92 to 20v blacktop Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Johnny
Forums Junkie

Location:
Sydney, OZ
Registered:
May 2002

Re: speed sensor ae92 to 20v blacktop

Wed, 17 August 2005 00:12

Quote:

maybe just the automatic silver 20v ecus which have diff ecu

I think it's got something to do with the auto ECU, the one I have has got the SPD sensor hooked up, but not the OD1, OD2 or the PWR/ECO buttons and it only Revs to 7500 rpm. The full import FX-GT we bought for rallying came as a full running car with an auto! (this is where we got the auto from when we changed from a manual) and when driving it with PWR on it would rev to 8,000, if in ECO it would only go to 6,500, when it was off ie not on PWR or ECO it would go to around 7500 rpm. So I suspect this is what is going on, and as of yet, I haven't had time to finish wiring this stuff up to the Blacktop's ECU, it's only a matter of find time to fully finish wiring this stuff up and seeing the difference. I will say the biggest problem I did have was finding someone that would swap a manual ECU for and Auto, just so we could run the Box..... and then find what pinout's were what to run the Box, Lucky S/top's weren't too different.

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Tue Jul 29 07:42:54 UTC 2025

Total time taken to generate the page: 0.0042369365692139 seconds

.:: Contact :: Home ::.