| Author | Topic |
|---|
Location:
Vancouver
Registered:
June 2004
|
|
Re: MASTERPOWER T61 ? advice on A\R size please [.7 front .82 rear]
|
Sat, 20 August 2005 04:50
 
|
 |
P.N. 802140...
cold side has a T61 compressor wheel inside a T04S style housing with 0.70A/R (4" inlet, 2.5" outlet)
hot side has a T04 "P" trim turbine inside a 0.84A/R T4 turbine cover which happens to have a T3 inlet flange, and a V-band outlet flange.
As one other fellow pointed out, the T4 family are available with the T3 flange, and are commonly referred to as a "euro flange" housing. The only thing "T3" about this turbo is the turbine inlet flange. EVERYTHING else about it is "T4" sized, including the "P" trim turbine wheel. On that note, the P-trim turbine and T4 sized turbine housing will massively outflow any T3 housing with a "stage 5" wheel... That's a big turbo, so I hope you are putting it on a motor that will turn it. It's good for 500HP+, but needs some airflow through it to actually get it to the point of positive feedback...
[Updated on: Sat, 20 August 2005 04:52]
|
|
|
| | Subject | Poster | Date |
|---|
 |
MASTERPOWER T61 ? do you speak turbo lingo?
|
petespipes | Thu, 18 August 2005 12:34 |
|
Re: advice on A\R size please [.7 front .82 rear]
|
twinturbo86 | Fri, 19 August 2005 01:00 |
|
Re: advice on A\R size please [.7 front .82 rear]
|
petespipes | Fri, 19 August 2005 02:07 |
|
Re: advice on A\R size please [.7 front .82 rear]
|
petespipes | Fri, 19 August 2005 06:08 |
|
Re: advice on A\R size please [.7 front .82 rear]
|
Toobs | Fri, 19 August 2005 02:16 |
|
Re: advice on A\R size please [.7 front .82 rear]
|
petespipes | Fri, 19 August 2005 03:01 |
|
Re: advice on A\R size please [.7 front .82 rear]
|
MR. 2 | Fri, 19 August 2005 03:09 |
|
Re: advice on A\R size please [.7 front .82 rear]
|
Chris Davey | Fri, 19 August 2005 03:30 |
|
Re: advice on A\R size please [.7 front .82 rear]
|
MS-75 | Fri, 19 August 2005 04:01 |
|
Re: advice on A\R size please [.7 front .82 rear]
|
Chris Davey | Fri, 19 August 2005 04:55 |
|
Re: advice on A\R size please [.7 front .82 rear]
|
Joshstix | Fri, 19 August 2005 06:45 |
|
Re: MASTERPOWER T61 ? advice on A\R size please [.7 front .82 rear]
|
petespipes | Fri, 19 August 2005 15:52 |
|
Re: MASTERPOWER T61 ? advice on A\R size please [.7 front .82 rear]
|
berad | Fri, 19 August 2005 23:09 |
|
Re: MASTERPOWER T61 ? advice on A\R size please [.7 front .82 rear]
|
petespipes | Sat, 20 August 2005 02:37 |
|
Re: MASTERPOWER T61 ? advice on A\R size please [.7 front .82 rear]
|
510rob | Sat, 20 August 2005 04:50 |
|
Re: MASTERPOWER T61 ? advice on A\R size please [.7 front .82 rear]
|
petespipes | Sat, 20 August 2005 12:22 |
|
Re: MASTERPOWER T61 ? do you speak turbo lingo?
|
petespipes | Sun, 21 August 2005 09:14 |
|
Re: MASTERPOWER T61 ? do you speak turbo lingo?
|
E30-323ti | Mon, 22 August 2005 04:27 |
|
Re: MASTERPOWER T61 ? do you speak turbo lingo?
|
petespipes | Mon, 22 August 2005 17:50 |
|
Re: MASTERPOWER T61 ? do you speak turbo lingo?
|
quest | Mon, 22 August 2005 17:55 |
|
Re: MASTERPOWER T61 ? do you speak turbo lingo?
|
petespipes | Mon, 22 August 2005 18:14 |
