| Author | Topic |
|---|
Location:
Canberra
Registered:
December 2002
|
|
Re: 18R-C Inlet Upgrade
|
Sat, 01 February 2003 03:01
 
|
 |
The exh manifold has a dirty great hole there so the gases can get right up under the intake manifold. To seperate the manifolds you would have to seal up the exh which would rerquire grinding sufficient material off the manifold to fit a plate in.
That sounds like a lok of work to me the other option for you is to get a set of extractors which would improve your performance anyhows.
|
|
|
| | Subject | Poster | Date |
|---|
 |
18R-C Inlet Upgrade
|
simulant | Mon, 27 January 2003 05:16 |
|
Re: 18R-C Inlet Upgrade
|
Jason | Mon, 27 January 2003 05:42 |
|
Re: 18R-C Inlet Upgrade
|
simulant | Tue, 28 January 2003 08:48 |
|
Re: 18R-C Inlet Upgrade
|
M.W.P. | Wed, 29 January 2003 06:48 |
|
Re: 18R-C Inlet Upgrade
|
Jason | Wed, 29 January 2003 22:11 |
|
Re: 18R-C Inlet Upgrade
|
M.W.P. | Thu, 30 January 2003 08:44 |
|
Re: 18R-C Inlet Upgrade
|
GIN51E | Thu, 30 January 2003 09:37 |
|
Re: 18R-C Inlet Upgrade
|
simulant | Thu, 30 January 2003 11:21 |
|
Re: 18R-C Inlet Upgrade
|
M.W.P. | Fri, 31 January 2003 05:50 |
|
Re: 18R-C Inlet Upgrade
|
Jason | Sat, 01 February 2003 03:01 |
|
Re: 18R-C Inlet Upgrade
|
M.W.P. | Sun, 02 February 2003 14:24 |
|
Re: 18R-C Inlet Upgrade
|
Jason | Sun, 02 February 2003 22:26 |
|
Re: 18R-C Inlet Upgrade
|
simulant | Mon, 03 February 2003 11:30 |
|
Re: 18R-C Inlet Upgrade
|
M.W.P. | Mon, 03 February 2003 12:46 |
