| Author | Topic |
|---|
Location:
Adelaide
Registered:
September 2003
|
|
Re: 18rgeu info pls.
|
Sun, 21 August 2005 23:20
 
|
 |
ok i just had a look at mine.
first the thermostat.
now you have an aftermarket computer right? so this may ned to change slightly for which ones you need.
on my thermostat (i have n aftermarket computer as well (haltech f7 map)), bottom brown plug has been removed to put the temperature sensor for the computer there. it was not needed as the computer manages cold starting and doesn't require the cold start injector. middle plug not used as this is the reference for the original computer which i (or yourself) don't have (so really i could have left the bottom brown plug and used this insted i suppose, the point is you don't need either if you have an aftermarket computer that manages cold starting, but you DO need somewheere for your computer to get a temperature reference from.)
top one goes to the temp sensor in your dash.
on the manifold...
left big one goes to the pipe hole coming out the middle of your rocker cover, next one goes to the fuel pressure regulator (as mentioned in your other thread in the tech and conversions section, mine also branches to the dizzy vac advance from this outlet as well, but could just be cos my dizzy may not have the correct internals), next one along goes straight down to an idle control valve that sits between pipes 2 and 3 on the intake runners, the idle control valve then loops itself back up to a pipe under the throttle body in case you are wondering.
next one along i have no idea (assume airconditioning crap) mine has been retapped for a manifold air pressure signal sensor to the computer.
last one on the right, big one at the bottom goes to brake booster, little insy vaccuum line at the top goes to mmy computer as well.
hope it helps as i know you have a different computer, but mine seems to run alright in its configuration.
|
|
|
| | Subject | Poster | Date |
|---|
 |
18rgeu info pls.
|
2syco | Sun, 21 August 2005 07:24 |
|
Re: 18rgeu info pls.
|
RA40Celica | Sun, 21 August 2005 07:49 |
|
Re: 18rgeu info pls.
|
2syco | Sun, 21 August 2005 08:12 |
|
Re: 18rgeu info pls.
|
barned01 | Sun, 21 August 2005 23:20 |
|
Re: 18rgeu info pls.
|
2syco | Mon, 22 August 2005 00:08 |
|
Re: 18rgeu info pls.
|
barned01 | Mon, 22 August 2005 03:49 |
|
Re: 18rgeu info pls.
|
willjudge | Sun, 04 September 2005 22:05 |
|
Re: 18rgeu info pls.
|
Scootaphill | Mon, 05 September 2005 09:12 |
