Location: Toronto, Downtown
Registered: September 2004
Re: 4AGZE mods
Mon, 22 August 2005 00:47
you will easily make 150 rwhp with a nevo pulley fmic and a decent exhaust but if you want to make 200rwhp it would be much easier to use a turbo but at 200rwhp you wouldnt need a huge turbo so lagg probably wont be an issue...
The easiest way is to find a rwd turbo manifold second hand if you can which has a flange to suit a t28 printer guys with a turbo dump pipe + turbo then all you will need is oil lines i/c piping fmic and to get turbo you might be even able to find a turbo kit for a rwd from one of the sthe exhaust fitted to the new dump pipe..
This is by far the cheapest way if you need to get a manifold and dump pipe made up it will cost alot more about $600-$1000 for the exhaust manifold and $300-600 for a dump pipe.
Mon, 22 August 2005 00:47
