Re: Corolla KE 55 to Celica RA65 Brake & Strut conver Prob with -neg Camber
Tue, 23 August 2005 06:33
ok yer this could be so ..
my wheel / tyre sits up on the outside edge to car .. not desirable for cornering.. it is only a bit looking ground level to wheel-- "contact point"
at present im hoping to change the arm and ball joints over from RA65 to RA40 -- to get it to sit better dont know weather this will work..
well i will be able too tell ya soon as i fit it or measure it up.. im hoping to get 6mm difference in the ball joints should push the wheel out a tad "finger's crossed "
Ps ive not yet got the springs altered to the hight im happy with,, and this may help also.. but im only gonna be sitting max inch and a half down.. i think..
PPs if u measure from the bottom of the rim 14x6 to the guard it was 53cm and standard strut was 52cm.. but my new springs are 20mm 2cm shorter.. " Springs were not standard to start with.(think they are King springs coz they're yellow"
Tue, 23 August 2005 06:33
ok yer this could be so ..
dont know weather this will work..
