F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Rebuild 4AGE - HELP!!! Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Initial_D Regular Location: Queensland Registered: February 2005	Re: Rebuild 4AGE - HELP!!! Wed, 24 August 2005 20:31 feral4mr2 wrote on Wed, 24 August 2005 23:42 i've never had any problem running after market gaskets (both ACL and AJUSA and good ol silasitc ) with non toyota coolants that contain anti-freeze. Quote: Also, I have had two problems with getting pistons/rings for them. 1st one is that the 4AGE from 86-87 has a 18.00 pin diameter and the 87-89 has a 20.00 diameter and than the 89-91 has a 20.00 diameter aswell but the 89-91 apparently the pistons have been lowered for compression. the only thing you need to worry about with the rings in getting the right set is the top ring gap/groove on the piston, the 2 difference are 1.5mm vs 1.2mm ring gap. measure the top ring gap with some verniers. C1741 is the ACL part # for 1.5mm ring gap and C1806 for the 1.2mm ring gap. then you just gotta know if you want STD or oversized. measure your crank where the conrod goes onto, if it's 40mm then you will need the 18mm pin piston and if it's 42mm then it's the 20mm pin piston. Is there anyway finding that stuff out without ripping the engine apart? Cheers [Report message to a moderator]

	Subject	Poster	Date
	Rebuild 4AGE - HELP!!!	Initial_D	Wed, 24 August 2005 08:16
	Re: Rebuild 4AGE - HELP!!!	Big T	Wed, 24 August 2005 09:40
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Wed, 24 August 2005 09:47
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Wed, 24 August 2005 09:49
	Re: Rebuild 4AGE - HELP!!!	Big T	Wed, 24 August 2005 10:05
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Wed, 24 August 2005 10:24
	Re: Rebuild 4AGE - HELP!!!	Big T	Wed, 24 August 2005 11:04
	Re: Rebuild 4AGE - HELP!!!	EVOSTi	Wed, 24 August 2005 11:20
	Re: Rebuild 4AGE - HELP!!!	Big T	Wed, 24 August 2005 13:14
	Re: Rebuild 4AGE - HELP!!!	feral4mr2	Wed, 24 August 2005 13:42
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Wed, 24 August 2005 20:31
	Re: Rebuild 4AGE - HELP!!!	feral4mr2	Wed, 24 August 2005 20:56
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Wed, 24 August 2005 21:01
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Wed, 24 August 2005 21:04
	Re: Rebuild 4AGE - HELP!!!	RobertoX	Wed, 24 August 2005 21:51
	Re: Rebuild 4AGE - HELP!!!	feral4mr2	Thu, 25 August 2005 09:05
	Re: Rebuild 4AGE - HELP!!!	Big T	Thu, 25 August 2005 11:57
	Re: Rebuild 4AGE - HELP!!!	feral4mr2	Thu, 25 August 2005 12:43
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Thu, 25 August 2005 21:13
	Re: Rebuild 4AGE - HELP!!!	feral4mr2	Fri, 26 August 2005 02:09
	Re: Rebuild 4AGE - HELP!!!	TopSecret72	Thu, 25 August 2005 22:28
	Re: Rebuild 4AGE - HELP!!!	Big T	Fri, 26 August 2005 09:10
	Re: Rebuild 4AGE - HELP!!!	TopSecret72	Fri, 26 August 2005 10:32
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Sat, 27 August 2005 09:57
	Re: Rebuild 4AGE - HELP!!!	Toobs	Fri, 26 August 2005 12:19
	Re: Rebuild 4AGE - HELP!!!	KOPDIS	Fri, 26 August 2005 12:31
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Sat, 27 August 2005 09:53
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Sun, 28 August 2005 09:33
	Re: Rebuild 4AGE - HELP!!!	feral4mr2	Sun, 28 August 2005 09:59
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Wed, 31 August 2005 07:47
	Re: Rebuild 4AGE - HELP!!!	feral4mr2	Wed, 31 August 2005 12:43
	Re: Rebuild 4AGE - HELP!!!	Initial_D	Fri, 02 September 2005 06:42
	Re: Rebuild 4AGE - HELP!!!	feral4mr2	Fri, 02 September 2005 11:22

Previous Topic:	MX83 LSD Oil?
Next Topic:	3SGTE headers..

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.