Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » General Car Talk » 4agze...where do they come from?

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
THE WITZL
Forums Junkie


Toymods Social Secretary

Location:
Sydney
Registered:
July 2002
 
Re: 4agze...where do they come from? Sat, 27 August 2005 03:29 Go to previous messageGo to previous message
the 4A-GZE came out in the following Toyotas...


  • AW11 MR-2 supercharger. Bigport AFM type, with distributor ignition
  • <9/89, AE92 Corolla Levin GT-Z. Bigport AFM type, with DLI igntion
  • >9/89, AE93 Corolla Levin GT-Z. Smallport MAP sensor type, with DLI ignition
  • AE101 Corolla Levin GT-Z. Smallport MAP sensor type, with DLI ignition



Now here are some of the differences of each type, ignoring the commonly known bigport vs smallport 4ag stuff....

Differences in AFM type 4A-GZE

# AW11 uses a dissy ignition system, and 3-rib block (not 100% on block comment)
# AE92 uses DLI ignition (wasted spark with crank angle sensor and twin coil packs), also has 7-rib block

Differences in MAP sensor type 4A-GZE

# AE93 has slightly stronger rods, same as used in 100kW 4age from Aus delivered SX/GTi corollas
# AE101 has slightly weaker rods, same as used in the silvertop 20V 4age
# AE101 ECU has serial data (so can use scan tool), AE92 does not
# Pinouts on the AE92 and AE101 vary slightly
# AE92 has a claimed 120kW factory power, and AE101 has 126kW claimed power - the only real difference here is the twin exhaust on the AE101


Differences in MAP vs AFM and other notes

# MAP sensor engines have a smaller supercharger pulley, giving more boost from factory
# 7-rib blocks have the piston oil squirters
# AFM has 8.0:1 compression pistons, and the MAP sensor versions have 8.9:1 compression pistons
# all 4agze engines have the same internal engine componets as equivalent 4A-GE engine from the same age/car - except pistons. AE101 gze has same crank and rods as 20V, but heads are different of course. AE92 smallport has same head, cams, crank, rods, block, etc etc.


Then there is the gearboxes from each car....

# AW11 - use an E58... i know little else Smile
# AE92/92 - use an E58. Quite rare to get an LSD though, if you do, it will 90% likely be a MAP sensor version.
# AE101 - use E58, and LSDs are far more common.
# E58-474 -> open centre
# E58-11C -> LSD
# E58-XX* -> where XX are two numbers, if * is odd, you have LSD.
# LSD and NON-LSD CV shafts are non-interchangeable.
  Send a private message to this user    

SubjectPosterDate
Read Message   4agze...where do they come from? J S EFri, 26 August 2005 15:19
Read Message   Re: 4agze...where do they come from? mc68Fri, 26 August 2005 15:42
Read Message   Re: 4agze...where do they come from? ShrakaFri, 26 August 2005 16:58
Read Message   Re: 4agze...where do they come from? J S ESat, 27 August 2005 00:46
Read Message   Re: 4agze...where do they come from? toofSat, 27 August 2005 01:39
Read Message   Re: 4agze...where do they come from?  THE WITZLSat, 27 August 2005 03:29
Read Message   Re: 4agze...where do they come from? SpanktownSat, 27 August 2005 03:39
Read Message   Re: 4agze...where do they come from? 4agteSat, 27 August 2005 06:44
Read Message   Re: 4agze...where do they come from? ShrakaSat, 27 August 2005 07:34
Read Message   Re: 4agze...where do they come from? THE WITZLSat, 27 August 2005 09:31
Read Message   Re: 4agze...where do they come from? MookieMon, 29 August 2005 09:35
Previous Topic:Wheel Repairer in CANBERRA / ACT
Next Topic:Caught Speeding ??

Goto Forum:
-=] Back to Top [=-

Current Time: Fri Jul 18 23:42:45 UTC 2025

Total time taken to generate the page: 0.0038049221038818 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.