| Author | Topic |
|---|
Location:
Tasmania
Registered:
May 2002
|
|
Re: 4agte into ke 30
|
Sun, 28 August 2005 08:27
 
|
 |
You will have to check yourself in your state. Try the department of Transport of whatever its called, they may have a website with the info.
But generaly speaking, in most states, you can put any Toyota 4cyl motor in a KE30, up to the size of 1.6 liters. This only requires a change of engine number and some small things like upgraded front brakes. There is a short list of things needed, but the front brake size listed is only about the same as KE70 brakes or something like that. So that covers 2T and 4A-GE engines if you get a new roadworthy cirtificate or something.
If you go bigger than 1.6, or turbo, or rotary you need a engineer to approve, but even then there are limits.
My secret tip is, if you use a 2T-G, you can say its a 1.6L but bore and stroke it to 2L and no one would know. I have done this, but mine is only 1.8L, but then again police have never questioned me because I'm in Tas and could get away with anything.
|
|
|
| | Subject | Poster | Date |
|---|
 |
4agte into ke 30
|
kontos | Sat, 27 August 2005 12:46 |
|
Re: 4agte into ke 30
|
oldcorollas | Sat, 27 August 2005 15:09 |
|
Re: 4agte into ke 30
|
ke20umm13b | Sun, 28 August 2005 01:06 |
|
Re: 4agte into ke 30
|
Jonny2TG | Sun, 28 August 2005 02:01 |
|
Re: 4agte into ke 30
|
ke20umm13b | Sun, 28 August 2005 04:18 |
|
Re: 4agte into ke 30
|
Jonny2TG | Sun, 28 August 2005 08:27 |
|
Re: 4agte into ke 30
|
kontos | Sun, 28 August 2005 09:10 |
|
Re: 4agte into ke 30
|
Jonny2TG | Sun, 28 August 2005 11:10 |
