Not sure on costs of the cam cover seals, give your local Toyota dealer a call and even try your local parts shop eg Supercheap Auto's... To replace the seals you remove the air intake pipe that runs over the cam covers, unscrew the 12 phillip head screws (6 on each cover) lift the cam cover of, remove the old rubber seals and install the new seals... But before you do this do the following...
Give the 12 screws a bit of a nip up, clean the oil out from the spark plug wells etc and leave for a few days while driving the car. Then check to see if it has leaked if it has replace the seals if not keep an eye out whenever you pop the bonnet. I hope what I told you makes sense and helps you out.
Mon, 29 August 2005 11:20
