Toymods Car Club Inc: Tech & Conversions => S.C AW11 over fueling, help please

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » S.C AW11 over fueling, help please Show: Today's Posts :: Show Polls Email to friend

Author

Topic

ke382TG
Forums Junkie

Registered:
May 2002

Re: S.C AW11 over fueling, help please

Tue, 30 August 2005 11:16

Quote:

i was thinking budget low quality etc etc

My MTX8 is about 4 to 5 years old, no probs have occured at all, if I have one I will let you know Wink

It has performed faultlessly in temps from -7 to +40, around town, on the track, at the drags, long trips etc etc.

I would have to say that they represent value rather than low quality, especially in the new series of units.

But in the end I couldn't give two tenths of a f#$k what ECU people use Very Happy

I have nothing to do with the automotive industry so I have nothing to gain or lose.

Basically my previous post was trying to point to the fact that if an individual has $4000 to spend on the purchase of an ECU then it is also likely that they have adequate funds to pay for tuning to be carried out and will expect a high standard result.

Someone who spends very little on the ECU will be likely to spend very little on the tune. The classic line "I'm not paying $800 for a tune! the ECU only cost me a grand". The cost of a tune does vary enormously but around here a GOOD tuner will charge upwards of $500 or $600. I think the people who buy a cheap ECU and use the cheapest (price of tuning is not always indicative of quality) tuner usually have low expectations, therefor are accepting of the fact that their end product is an inadequate performer across the range of ECU functions. People just need to know this does not need to be the case Smile

Just as a brain is only as knowledgeable as the information it is filled with, an ECU can only perform as well as the information the tuner supplies it with Wink

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Mon Jun 3 17:48:49 UTC 2024

Total time taken to generate the page: 0.0039858818054199 seconds

.:: Contact :: Home ::.