F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » RA40 Needs Help Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Fenris Occasional Poster Location: Perth West Aus Registered: November 2004	Re: RA40 Needs Help Wed, 31 August 2005 00:20 I did a quick check on the exhaust valve clearances and as it turns out the two middle ones were too tight and had no clearance. That might explain why the two middle plugs were slightly fouled compared to the outer ones. I performed a 'thats about right' adjustment and the engine is finally idling smoothly without bouncing around and rocking the car. I just need to get a set of guages that aren't rusty and properly adjust all the valves. This has inspired me to keep the car licensed and not drive it to the tip, and maybe even fix a few other things as well. [Report message to a moderator]

	Subject	Poster	Date
	RA40 Needs Help	Fenris	Fri, 19 August 2005 01:25
	Re: RA40 Needs Help	Maurice c	Fri, 19 August 2005 02:46
	Re: RA40 Needs Help	thechuckster	Fri, 19 August 2005 07:50
	Re: RA40 Needs Help	Maurice c	Fri, 19 August 2005 08:14
	Re: RA40 Needs Help	thechuckster	Fri, 19 August 2005 08:41
	Re: RA40 Needs Help	Allan	Fri, 19 August 2005 09:06
	Re: RA40 Needs Help	tricky	Fri, 19 August 2005 12:13
	Re: RA40 Needs Help	Fenris	Tue, 30 August 2005 06:03
	Re: RA40 Needs Help	Maurice c	Tue, 30 August 2005 15:13
	Re: RA40 Needs Help	Fenris	Wed, 31 August 2005 00:20
	Re: RA40 Needs Help	Azura_Beowulf	Wed, 31 August 2005 05:29

Previous Topic:	4age idle up computer?
Next Topic:	5s-fe to turbo

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.