Toymods Car Club Inc: Tech & Conversions => RA65 Rear disc brake conversion

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » RA65 Rear disc brake conversion Show: Today's Posts :: Show Polls Email to friend

Author

Topic

ZZT231
Forums Junkie

I Supported Toymods

Location:
melbourne.vic.au
Registered:
May 2002

Re: RA65 Rear disc brake conversion

Thu, 01 September 2005 06:39

wilbo666 wrote on Wed, 31 August 2005 14:06

ZZT231 wrote on Tue, 30 August 2005 23:03

SA63 wrote on Tue, 30 August 2005 22:50

There should be no difference because the RA65/SA63 uses the same disc pads from the MA61 so there wouldn't by any bias on the brakes required

I think he is talking about the front discs as the SA63 and the MA61 are the same, as I borrowed his new spare rotors when I found mine cracked on the MA61...

Anyway from further studying... I discovered that the RA65 and SA63 share the same master brake cylinder (PNC#47201-14460) whereas the MA61 master cylinder is different part number (PNC#47201-240100).

Externally, we (SA63 & myself) compared the 2 cylinders on the 2 cars and they look the same...

I believe that the internals are the same (RA6X/SA63 to MA61), however you will notice that the outlets for the brake lines are mounted in different spots. MA61 have the outlets out the side pointing into the engine bay...I don't recall what RA6X/SA63 have off the top of my head...

Cheers
Wilbo

From the quote you took from me, I re corrected myself and said that was from Memory on the following post... The externals are most probably different, I have a spare MA61 Master Cylinder here at home but I can't seem to find it to compare to the SA63 side by side. But if I find the master cylinder, I'll take a snap shot of them side by side...

Cheers.

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Fri Jan 3 08:58:46 UTC 2025

Total time taken to generate the page: 0.0092370510101318 seconds

.:: Contact :: Home ::.