Toymods Car Club Inc: Tech & Conversions => oil cooler on a 20V

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » Tech & Conversions » oil cooler on a 20V Show: Today's Posts :: Show Polls Email to friend

Author

Topic

domasik
Forums Junkie

Location:
Sydney
Registered:
November 2003

Re: oil cooler on a 20V

Tue, 06 September 2005 01:19

are you after something like this?

http://wtljkane.customer.netspace.net.au/blockex.jpg

this is on a 16v block but i was thinking about using the same setup on my N/A 20v as its alot more compact that the AE92 sandwich plate which fouls my KE side engine mount.

Skaney wrote on Wed, 10 August 2005 18:09

It came with the oil cooler in a kit. But I think you can by them seperate. Has a Thermostat in it, alot of aftermarket ones dont.
I got it through Dr. Drift.

Skaney wrote on Wed, 10 August 2005 20:21

Whole kit was $180 inc hoses, fittings and the cooler.
Look for him on nissansilvia.com

hope that helps

bluehachi wrote on Mon, 05 September 2005 18:38

theres a bolt in the block above the oil press sender unit on the exhaust side on the 20V, is this tapped into the oil system, i figure it is due to its location next to the pump and oil press sender.

can u take a photo of this please?

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Fri Feb 7 15:43:40 UTC 2025

Total time taken to generate the page: 0.0097970962524414 seconds

.:: Contact :: Home ::.