F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 2tg firing order Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
yrhkira Regular Location: Canberra Registered: June 2005	Re: 2tg firing order Tue, 06 September 2005 01:38 ae71 kid, Good to hear you got the motor running. 20 degrees is a lot if that is the idle timming. If I recall correctly there should be two marks on the crank pulley. The first to come around is the timming mark and the next is TDC. There should be a mark or pointer on the timing chain cover to reference too. The factory static timing works out to be 12 degrees BTDC and about that at an idle of 900 odd rpm. If you plan to use normal (low RON) pump ULP drop back to 10 degrees static. I think, without going back to the manual (which is at home) the distributor should run to around 24 degrees of maximum advance. Hope this is of help Regards Rodger [Report message to a moderator]

	Subject	Poster	Date
	2tg firing order	ae71 kid	Fri, 02 September 2005 08:31
	Re: 2tg firing order	Buster	Fri, 02 September 2005 10:09
	Re: 2tg firing order	pheonix83	Fri, 02 September 2005 10:11
	Re: 2tg firing order	SIKTA22	Fri, 02 September 2005 11:21
	Re: 2tg firing order	YelloRolla	Fri, 02 September 2005 14:22
	Re: 2tg firing order	September_Squall	Fri, 02 September 2005 14:46
	Re: 2tg firing order	yrhkira	Mon, 05 September 2005 03:42
	Re: 2tg firing order	ae71 kid	Mon, 05 September 2005 10:03
	Re: 2tg firing order	yrhkira	Tue, 06 September 2005 01:38
	Re: 2tg firing order	rthy	Tue, 06 September 2005 04:02
	Re: 2tg firing order	ae71 kid	Tue, 06 September 2005 10:25
	Re: 2tg firing order	Henn	Tue, 06 September 2005 04:21

Previous Topic:	1uz turbo claims
Next Topic:	k50-k40 measurements

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.