F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » stroking my 2tgeu Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
yrhkira Regular Location: Canberra Registered: June 2005	Re: stroking my 2tgeu Tue, 06 September 2005 02:08 lilcrash, The 2T-G pistons as an answer to the thinking bit cannot be used. The stroking of the 2T-G is very worth while. With the extra stroke and an oversize piston it can be taken out to 1940cc. This will give a very drivable motor with heaps of low down power and will still rev to 6500 with stock cams, standard tune and jetting. Best thing no-one will know what is inside as the authorities will still see the 2T engine number which relates to 1600cc. To run the 3T crank in the 2T-G block, the block will have to be relieved to clear the con rod as it swings around. You will see where the crank and rods hit when they are dummied in place. 3T-GTE pistons result in too lower compression. Stock 3T pistons would be a place to start but they do not have the fly-cuts to clear the valves. This can be done by a competent machine shop. Copy the cuts on the 2T-G piston. If there is doubt about this then all I can say I have done it before. There is plenty of meat in the piston crown. Mind you they are not as strong as a custom forged piston. Custom pistons are the go, though. Any of the work will involve completly stripping the motor down. So if you decide to go custom pistons then make them 4mm oversize to 89mm to give the 1940cc with the 3T crank. Regards Rodger [Report message to a moderator]

	Subject	Poster	Date
	stroking my 2tgeu	lilcrash	Mon, 05 September 2005 20:15
	Re: stroking my 2tgeu	September_Squall	Tue, 06 September 2005 00:21
	Re: stroking my 2tgeu	yrhkira	Tue, 06 September 2005 02:08
	Re: stroking my 2tgeu	hokey	Tue, 06 September 2005 08:02
	Re: stroking my 2tgeu	lilcrash	Tue, 06 September 2005 07:57
	Re: stroking my 2tgeu	yrhkira	Wed, 07 September 2005 04:07
	Re: stroking my 2tgeu	September_Squall	Wed, 07 September 2005 04:16
	Re: stroking my 2tgeu	September_Squall	Sat, 10 September 2005 01:09
	Re: stroking my 2tgeu	Norbie	Wed, 07 September 2005 04:16
	Re: stroking my 2tgeu	hokey	Wed, 07 September 2005 06:35
	Re: stroking my 2tgeu	September_Squall	Wed, 07 September 2005 08:10
	Re: stroking my 2tgeu	ROTAROLA	Wed, 07 September 2005 12:36
	Re: stroking my 2tgeu	yrhkira	Wed, 07 September 2005 22:50
	Re: stroking my 2tgeu	goonman86	Thu, 08 September 2005 10:57
	Re: stroking my 2tgeu	mynameisrodney	Thu, 08 September 2005 10:53
	Re: stroking my 2tgeu	lilcrash	Thu, 08 September 2005 19:35
	Re: stroking my 2tgeu	September_Squall	Fri, 09 September 2005 13:12
	Re: stroking my 2tgeu	lilcrash	Fri, 09 September 2005 22:07

Previous Topic:	weird noise
Next Topic:	1GGTE Vernier cam gears

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.