F.A.Q.    Register    Login    Home Members    Search

Toymods » General Car Talk » celica rim size Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
matt86sx Regular Location: Gold Coast, QLD Registered: April 2004	Re: celica rim size Tue, 13 September 2005 05:20 The stud pattern on an ST162 is 5x100, meaning 5 studs spaced equally on a circle of diameter 100mm. A rim with a 5x114.3 hole pattern will not fit, period. The standard offset for the ST162 is +39mm. (You can find this cast into the wheel under the centre cap, if you still have the original rims.) Check the diagram below for an explanation of offset: In addition to moving the rim inwards (when the offset is increased) or outwards (when decreased), changing the offset will also change the track width, ie the distance between the rim centrelines measured across the car. Changing the track width may be illegal for you so it would be wise to check. For instance in QLD you can increase the track width up to 26mm (ie 13mm per side) but not decrease it. Hope that helps. Matt [Updated on: Tue, 13 September 2005 05:23] [Report message to a moderator]

	Subject	Poster	Date
	celica rim size	havabeer	Tue, 13 September 2005 03:16
	Re: celica rim size	ST162GT-R	Tue, 13 September 2005 03:25
	Re: celica rim size	havabeer	Tue, 13 September 2005 03:44
	Re: celica rim size	Corona RT142	Tue, 13 September 2005 03:47
	Re: celica rim size	st184 sillycar	Tue, 13 September 2005 04:46
	Re: celica rim size	ST162GT-R	Tue, 13 September 2005 04:47
	Re: celica rim size	Corona RT142	Tue, 13 September 2005 04:47
	Re: celica rim size	matt86sx	Tue, 13 September 2005 05:20
	Re: celica rim size	smashed_wombat	Tue, 13 September 2005 07:12
	Re: celica rim size	matt86sx	Tue, 13 September 2005 23:39

Previous Topic:	World NO OIL Day!!
Next Topic:	IJZ 747 on zoom cover

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.