F.A.Q.    Register    Login    Home Members    Search

Toymods » Members Rides » Tricky's RA23 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Steve M Forums Junkie Location: Adelaide Registered: June 2003	Re: Tricky's RA23 Wed, 14 September 2005 03:23 I have a couple of 88270 heads that need some water port work. If you have trouble finding something good, let me know we can work something out. I also have an 88253 18RGU head that I don't really want, it's been pressure tested and has no cracks. It also doesn't need and water port welding work done. These heads have ports about the same as the 88270 heads and the larger valves too. I'd want to make up some port profiles before I god rid of it though. I have an 18RGU dizzy that had a damaged vacuum advance. It was crash damaged and a little bent. I managed to straighten it out and it still worked fine. One issue we found was that some 18RG vacuum advances need different size holes to go into. The 88210 dizzy needs a smaller hole I think than the later ones. When you swapped over the electronic dizzy internals did you change the bottom end of the shaft too? I ask because the advance curves are dependent on the bottom of the shaft. Each engine has a different amount of mechanical advance. I don't really remember what numbers were degree numbers written on my dizzies, but there were differences. [Report message to a moderator]

	Subject	Poster	Date
	Tricky's RA23	tricky	Sun, 04 September 2005 13:18
	Re: Tricky's RA23	tricky	Thu, 08 September 2005 11:54
	Re: Tricky's RA23	74gt	Fri, 09 September 2005 15:55
	Re: Tricky's RA23	tricky	Sat, 10 September 2005 10:38
	Re: Tricky's RA23	Steve M	Sun, 11 September 2005 02:03
	Re: Tricky's RA23	tricky	Sun, 11 September 2005 07:28
	Re: Tricky's RA23	Steve M	Sun, 11 September 2005 12:35
	Re: Tricky's RA23	tricky	Tue, 13 September 2005 23:51
	Re: Tricky's RA23	Steve M	Wed, 14 September 2005 03:23
	Re: Tricky's RA23	tricky	Wed, 14 September 2005 08:33
	Re: Tricky's RA23	Steve M	Thu, 15 September 2005 13:57
	Re: Tricky's RA23	tricky	Sat, 17 September 2005 07:27
	Re: Tricky's RA23	Steve M	Sat, 17 September 2005 12:59
	Re: Tricky's RA23	tricky	Sun, 18 September 2005 00:23
	Re: Tricky's RA23	tricky	Sat, 10 December 2005 14:00

Previous Topic:	My RA21
Next Topic:	4AG '72 Celica

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.