| Author | Topic |
|---|
Location:
Melbourne
Registered:
June 2004
|
|
20V Idle/Brake Booster Problems
|
Sat, 17 September 2005 03:22
|
 |
Hey guys,
I got a slight problem on my 20v. I hooked up what I thought to be the brake booster, now i know that on a 20v you can hook it up to either the vacuum points on throttle 1 or 4, from what i could tell on my setup is that both these holes were summed by a t-joint that was under my throttles. Now i hooked the brake booster up to the last point on the t-joint. however, in doing so, the engine wouldn't idle, it would just shut off. Upon removal the car would idle fine.
I tried searching but couldn't find anything like this... any advice guys? should i remove the t-joint? am i hooking it up to the wrong thing?
help!
shiri
|
|
|
