| Author | Topic |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
Re: 2s to 3s-gte
|
Tue, 20 September 2005 23:06
 
|
 |
Howdy, the problem with all this is nothing in a 3sgte conversion is just a 'bolt up, no modification job'. Pretty much every single part of the conversion needs modifications.
What we are all saying here is the 2S bellhousing is a good start, the bolt holes line up to the 3S block and it does bolt together. - Now this doesn't actually mean thats all you have to do and it'll all just work. Many other things need to be changed and as always there is lots of ways to skin a cat.
If we are strickly talking bellhousings.. Then a 2S bellhousing with a double row spigot bearing or 8 - 10mm shaved off the face of it will get you started.
So Wilbo's and my statement stand correct, the bellhousing does bolt to the 3S, and if decide to get around the input shaft/spigot bearing problem using the double row spigot then you could get away with no bellhousing modifications at all.
But then you will have to also run a different clutch throwout bearing also. So maybe you should be shaving the face of the bellhousing instead, which means it does need to be modified.
Have you considered problems like, flywheel, sump, engine mounts, inlet manifold, turbo manifold, distributor, water pipes? All these need to be modified.
[Updated on: Tue, 20 September 2005 23:10]
|
|
|
| | Subject | Poster | Date |
|---|
 |
2s to 3s-gte
|
st141addict | Tue, 20 September 2005 02:09 |
|
Re: 2s to 3s-gte
|
TurboRA28 | Tue, 20 September 2005 02:24 |
|
Re: 2s to 3s-gte
|
st141addict | Tue, 20 September 2005 02:42 |
|
Re: 2s to 3s-gte
|
st141addict | Tue, 20 September 2005 02:42 |
|
Re: 2s to 3s-gte
|
84supra | Tue, 20 September 2005 03:19 |
|
Re: 2s to 3s-gte
|
Mookie | Tue, 20 September 2005 04:01 |
|
Re: 2s to 3s-gte
|
st141addict | Tue, 20 September 2005 04:45 |
|
Re: 2s to 3s-gte
|
TurboRA28 | Tue, 20 September 2005 06:39 |
|
Re: 2s to 3s-gte
|
st141addict | Tue, 20 September 2005 08:27 |
|
Re: 2s to 3s-gte
|
wilbo666 | Tue, 20 September 2005 10:33 |
|
Re: 2s to 3s-gte
|
st141addict | Tue, 20 September 2005 14:04 |
|
Re: 2s to 3s-gte
|
TurboRA28 | Tue, 20 September 2005 23:06 |
|
Re: 2s to 3s-gte
|
st141addict | Tue, 20 September 2005 23:40 |
|
Re: 2s to 3s-gte
|
wilbo666 | Tue, 20 September 2005 23:54 |
|
Re: 2s to 3s-gte
|
st141addict | Wed, 21 September 2005 00:18 |
|
Re: 2s to 3s-gte
|
wilbo666 | Wed, 21 September 2005 00:38 |
|
Re: 2s to 3s-gte
|
TurboRA28 | Tue, 20 September 2005 23:48 |
