Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Crank sensor on 1jz-gte (installing a Wolf3D)

Show: Today's Posts  :: Show Polls 
Email to friend  		Return to the default flat view Create a new topic Submit Reply
AuthorTopic
Pete
Regular


Location:
gold coast
Registered:
May 2002
 
Re: Cank sensor on 1jz-gte (installing a Wolf3D) Mon, 10 February 2003 10:09 Go to previous messageGo to previous message
This is what your after.

http://home.austarnet.com.au/petew/JZ/CAS.jpg

I drew this on CAD. You will need to check the actual ignition timing with a timing light at idle. This will tell you how many degrees the sensor is out.
  Send a private message to this user    
[Message index]

SubjectPosterDate
Read Message   Crank sensor on 1jz-gte (installing a Wolf3D) jbroughSun, 09 February 2003 12:38
Read Message   Re: Cank sensor on 1jz-gte (installing a Wolf3D) YoungySun, 09 February 2003 12:45
Read Message   Re: Cank sensor on 1jz-gte (installing a Wolf3D) GTI16VSun, 09 February 2003 21:19
Read Message   Re: Cank sensor on 1jz-gte (installing a Wolf3D)  PeteMon, 10 February 2003 10:09
Read Message   Re: Cank sensor on 1jz-gte (installing a Wolf3D) jbroughTue, 11 February 2003 00:10
Previous Topic:Dash wiring (general)
Next Topic:4agze wiring help!!!! PLEASE

Goto Forum:
-=] Back to Top [=-

Current Time: Sat Jul 26 22:24:46 UTC 2025

Total time taken to generate the page: 0.0069000720977783 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.