Toymods Car Club Inc: Tech & Conversions => brake booster not working...

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » brake booster not working... Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Scorpion
Forums Junkie

Location:
Menai area of Sydney
Registered:
June 2003

Re: brake booster not working...	Thu, 22 September 2005 22:05

To see if rear brakes are the problem pull your handbrake on press the brake pedal. If there is a lot less movement then you need to adjust the rear brakes. If no change, pump the pedal a couple of times and see if movement reduces. If it does then you need to bleed your brakes properly. if you bleed the brakes properly - rear passenger, rear driver, front passenger, front driver in that order - and it still has a lot of travel you probably need to change the master cylinder. Don't let the master culinder run dry when you are bleeding the brakes or you'll have to start all over again. FYI, I know brake mechanics who prefer rear drums because they can adjust the balance between front and rear braking tosuit the car/driver. If yours keep binding then they need to be checked over. [Updated on: Thu, 22 September 2005 22:06] [Report message to a moderator]

Current Time: Mon Jul 28 01:24:10 UTC 2025

Total time taken to generate the page: 0.0064470767974854 seconds

.:: Contact :: Home ::.