F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Crank Pulley Removal Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Nobody Occasional Poster Location: Sydney Registered: April 2003	Re: Crank Pulley Removal Sun, 25 September 2005 12:44 Engine 5SFE. Crank pulley bolt: After consulting the Haynes manual I bent 1 screwdriver and broke 2 12 point sockets and a 6 point socket. Tried the WD-40 leave it for days, with a 58cm breaker bar (now with impact socket) and now with my wife on the brake instead of trying to stop the turning with a screwdriver. Didn't work. Tried to heat it with a propane torch then use same breaker bar. Didn't work. Got a 500 ft-lb 3/4" impact wrench. Got it off, but took some seconds to loosen (so don't give up immediately). Crank pulley: Tried a 3 arm gear puller. Broke the front lip of the pulley. Tried a pry bar behind the pulley but it broke the rear pulley lip. Finally got a "Universal Pulley Puller" but wasn't universal as it didn't have the 6mm (I think) bolts required for the pulley. Got some old carby retainer bolts which did the job. Now all I need is a new pulley. I hope this helps anyone trying to so this as the advice I got on this site helped me. [Report message to a moderator]

	Subject	Poster	Date
	Crank Pulley Removal	Dust	Sat, 18 September 2004 09:15
	Re: Crank Pulley Removal	fade-e	Sat, 18 September 2004 09:29
	Re: Crank Pulley Removal	ed_ma61	Sat, 18 September 2004 09:38
	Re: Crank Pulley Removal	Dust	Sat, 18 September 2004 09:38
	Re: Crank Pulley Removal	Dust	Sat, 18 September 2004 10:20
	Re: Crank Pulley Removal	thechuckster	Sat, 18 September 2004 10:59
	Re: Crank Pulley Removal	brett_celicacoupe	Sat, 18 September 2004 12:02
	Re: Crank Pulley Removal	towe_001	Sat, 18 September 2004 12:31
	Re: Crank Pulley Removal	Dust	Mon, 20 September 2004 11:19
	Re: Crank Pulley Removal	mrshin	Mon, 20 September 2004 13:30
	Re: Crank Pulley Removal	allencr	Mon, 20 September 2004 19:49
	Re: Crank Pulley Removal	Dust	Wed, 22 September 2004 08:32
	Re: Crank Pulley Removal	Ra28Freak	Wed, 22 September 2004 16:03
	Re: Crank Pulley Removal	HyDrA	Wed, 22 September 2004 18:55
	Re: Crank Pulley Removal	Dust	Wed, 22 September 2004 22:33
	Re: Crank Pulley Removal	ViPeR_NiPPleX	Thu, 23 September 2004 02:22
	Re: Crank Pulley Removal	Dust	Thu, 23 September 2004 23:51
	Re: Crank Pulley Removal	ed_ma61	Fri, 24 September 2004 10:56
	Re: Crank Pulley Removal	Flogbag	Fri, 24 September 2004 10:53
	Re: Crank Pulley Removal	allencr	Fri, 24 September 2004 13:05
	Re: Crank Pulley Removal	Norbie	Fri, 24 September 2004 13:17
	Re: Crank Pulley Removal	Dust	Fri, 24 September 2004 17:56
	Re: Crank Pulley Removal	Dust	Fri, 24 September 2004 20:46
	Re: Crank Pulley Removal	EvilJack	Sat, 25 September 2004 01:07
	Re: Crank Pulley Removal	Dust	Sat, 25 September 2004 02:57
	Re: Crank Pulley Removal	EvilJack	Sun, 26 September 2004 05:02
	Re: Crank Pulley Removal	justcallmefrank	Sun, 26 September 2004 09:41
	Re: Crank Pulley Removal	EvilJack	Sun, 26 September 2004 12:48
	Re: Crank Pulley Removal	justcallmefrank	Sun, 26 September 2004 12:50
	Re: Crank Pulley Removal	THE WITZL	Sun, 26 September 2004 13:44
	Re: Crank Pulley Removal	Nobody	Sun, 25 September 2005 12:44

Previous Topic:	GZE MR2 Troubles
Next Topic:	ae86 tach signal

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.