| Author | Topic |
|---|
Location:
Brisbane
Registered:
December 2002
|
|
Re: Argh.. removing sheared off bolts.
|
Wed, 12 February 2003 06:50
 
|
 |
what you need to do is drill a small whole in the bolt, making sure you do it dead center. then you need to get a bolt removing tool. ( you can get one of these from any hardware shop or super cheap). the tool is similar to a drill bit but its thread is chunkier and in reverse. you slowly turn it inward and when it gets a firm hold it should start to turn the bolt.
Well that is what it is meant to do. give that a go.
|
|
|
