| Author | Topic |
|---|
Location:
Hobart
Registered:
June 2002
|
|
Re: DLI For 3SGE... Sort of.
|
Thu, 29 September 2005 03:47
 
|
 |
| thechuckster wrote on Wed, 28 September 2005 21:12 |
Msquirt doesn't do Coil-on-plug - just waste spark.
i'll try to find the username of the person on here who's converted their 3sge to msquirt
|
I'm not so sure about COP. I believe you CAN do it with a 2nd trigger input.
You have one wheel with many teeth, and one wheel with one tooth. These are camshaft sensors. This means MSNS-E can synchronize with the full engine cycle, all 720 crank degrees. Next you program how many teeth each trigger point is after the sync pulse. Then you can use the LED outputs on the megasquirt with 4 VB921s to drive 4 coils. Done.
look here http://megasquirt.sourceforge.net/extra/setup-whee l.html
MSNS-E only, not MSII
That guy you are thinking of, i think this is him...
http://forums.toymods.org.au/index.php?t=usrinfo&a mp;id=10300&rid=572&S=8f5f439d527cf7409285 7f0844f109eb
username lmr052, same name on www.msefi.com
Cheers
Chris
|
|
|
