F.A.Q.    Register    Login    Home Members    Search

Classifieds » Parts Wanted » gbox & bellhousing suit RWD 3S-GTE Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
o_man_ra23 Regular Location: Townsville North Qld Registered: June 2003	Re: gbox & bellhousing suit RWD 3S-GTE Fri, 30 September 2005 23:00 The dizzy fouling the firewall is a common problem, and the solution to this is to use an aftermarket ignition module which operates off a crank angle sensor and runs a 4 coil pack. Most aftermarket ECU's also do this, so you would only require the aftermarket ignition module if you were using the standard ECU, or a lower end aftermarket ECU. Cheers, Owen EDIT: also the position of the starter motor is dependant upon the gearbox, not the motor. Using one that is meant for the gearbox you are using is the simplest solution, just make sure that the ring gear on your flywheel is the same size/number of teeth that the starter motor is meant for. [Updated on: Fri, 30 September 2005 23:01] [Report message to a moderator]

	Subject	Poster	Date
	gbox & bellhousing suit RWD 3S-GTE	Wildsupra	Fri, 30 September 2005 02:21
	Re: gbox & bellhousing suit RWD 3S-GTE	setsuna	Fri, 30 September 2005 02:48
	Re: gbox & bellhousing suit RWD 3S-GTE	o_man_ra23	Fri, 30 September 2005 06:41
	Re: gbox & bellhousing suit RWD 3S-GTE	Wildsupra	Fri, 30 September 2005 07:14
	Re: gbox & bellhousing suit RWD 3S-GTE	Wildsupra	Fri, 30 September 2005 07:17
	Re: gbox & bellhousing suit RWD 3S-GTE	setsuna	Fri, 30 September 2005 07:51
	Re: gbox & bellhousing suit RWD 3S-GTE	KAYZEE	Fri, 30 September 2005 12:10
	Re: gbox & bellhousing suit RWD 3S-GTE	setsuna	Fri, 30 September 2005 15:25
	Re: gbox & bellhousing suit RWD 3S-GTE	o_man_ra23	Fri, 30 September 2005 23:00
	Re: gbox & bellhousing suit RWD 3S-GTE	Wildsupra	Sat, 01 October 2005 01:02
	Re: gbox & bellhousing suit RWD 3S-GTE	TerryOBeirne	Sat, 01 October 2005 01:35
	Re: gbox & bellhousing suit RWD 3S-GTE	setsuna	Sat, 01 October 2005 02:11
	Re: gbox & bellhousing suit RWD 3S-GTE	o_man_ra23	Sun, 02 October 2005 00:29
	Re: gbox & bellhousing suit RWD 3S-GTE	crazyracer	Wed, 05 October 2005 05:50
	Re: gbox & bellhousing suit RWD 3S-GTE	setsuna	Wed, 05 October 2005 06:06
	Re: gbox & bellhousing suit RWD 3S-GTE	crazyracer	Wed, 05 October 2005 13:44
	Re: gbox & bellhousing suit RWD 3S-GTE	setsuna	Wed, 05 October 2005 14:38
	Re: gbox & bellhousing suit RWD 3S-GTE	crazyracer	Thu, 06 October 2005 03:08

Previous Topic:	ae86 sprinter driver side door need.
Next Topic:	ae86 parts takumi tax free

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.