| Author | Topic |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
Re: 3SGTE oil cooler/warmer
|
Sat, 01 October 2005 10:52
 
|
 |
Digging up an old thread here... But i'm just back to working on this oil setup. I'm going to run a remote filter and cooler.
I got an adapter plate thing. Now on the 3sgte, there is a alloy block that bolts on, with 4 holes, these go into the block. then the factory head exchanger bolts onto this.
i assume i take the head exchanger off, but leave the 4 bolt alloy block thing. as the engine block itself isn't threaded in the centre.
also, if i have room to run the heat exchanger, as well as the remote oil filter and cooler, should i? the remote oil cooler has a thermostat in it as well.
Thanks
JOel
|
|
|
| | Subject | Poster | Date |
|---|
 |
3SGTE oil cooler/warmer
|
TurboRA28 | Sat, 19 February 2005 07:11 |
|
Re: 3SGTE oil cooler/warmer
|
MR. 2 | Sat, 19 February 2005 07:23 |
|
Re: 3SGTE oil cooler/warmer
|
gabe | Sat, 19 February 2005 07:32 |
|
Re: 3SGTE oil cooler/warmer
|
TurboRA28 | Sat, 19 February 2005 07:27 |
|
Re: 3SGTE oil cooler/warmer
|
Cool1 | Sat, 19 February 2005 08:28 |
|
Re: 3SGTE oil cooler/warmer
|
TurboRA28 | Sat, 19 February 2005 08:54 |
|
Re: 3SGTE oil cooler/warmer
|
off-road | Sat, 19 February 2005 10:36 |
|
Re: 3SGTE oil cooler/warmer
|
Joshstix | Sat, 19 February 2005 12:20 |
|
Re: 3SGTE oil cooler/warmer
|
allencr | Sat, 19 February 2005 14:14 |
|
Re: 3SGTE oil cooler/warmer
|
TurboRA28 | Sat, 01 October 2005 10:52 |
|
Re: 3SGTE oil cooler/warmer
|
Joshstix | Mon, 03 October 2005 04:53 |
