| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: 7M-GE in MZ10 soarer
|
Sat, 01 October 2005 15:23
 
|
 |
Many factors depend. What is the 7M-GE out of? You will need a front sump (You can swap you M-TEU front sump of you have a MA70 7M).
You can use the engine mounts off your existing M-TEU.
The existing MZ10 High Pressure PS hose can be modified to fit.
You can use the existing Oil cooler.
You will need a shorter accelerator cable (suggest SV21 camry if I recall).
If you are going manual you can use a MA61/RA6X manual gearbox crossmember. If you are going auto I am not sure if the stock auto crossmember will fit.
The wiring will 100% not plug straight in. 
You will need to extend the MZ10 alternator plug (or wire in the 7M alternator from the 7M loom).
Many other wiring efforts will need to be undertaken as well such as, wiring +Batt, +B, M-REL, STA, water temp, tacho, oil light etc etc etc.
Cheers
Wilbo
|
|
|
| | Subject | Poster | Date |
|---|
 |
7M-GE in MZ10 soarer
|
nemesis2187 | Sat, 01 October 2005 14:03 |
|
Re: 7M-GE in MZ10 soarer
|
wilbo666 | Sat, 01 October 2005 15:23 |
|
Re: 7M-GE in MZ10 soarer
|
thechuckster | Sat, 01 October 2005 15:23 |
